name mode size
..
doc 040000
Makefile 100644 199B
README 100644 12.17kB
tcpops.c 100644 7.92kB
tcpops.h 100644 1.46kB
tcpops_mod.c 100644 20.34kB
README
TCP Ops module Camille Oudot Orange Olle E. Johansson Edvina AB Copyright © 2015 Orange Copyright © 2015 Edvina AB, Sollentuna, Sweden __________________________________________________________________ Table of Contents 1. Admin Guide 1. Overview 2. Parameters 2.1. closed_event (int) 2.2. event_callback (str) 3. Functions 3.1. tcp_conid_alive(conid) 3.2. tcp_conid_state(conid) 3.3. tcp_keepalive_enable([conid], idle, count, interval) 3.4. tcp_keepalive_disable([conid]) 3.5. tcp_set_connection_lifetime([conid], lifetime) 3.6. tcp_enable_closed_event([conid]) 3.7. tcp_get_conid(hostport, pvname) 3.8. tcp_set_otcpid(conid) 3.9. tcp_set_otcpid_flag(mode) 4. Event routes 4.1. tcp:closed 4.2. tcp:timeout 4.3. tcp:reset 4.4. Example List of Examples 1.1. Set closed_event parameter 1.2. Set event_callback parameter 1.3. tcp_conid_alive usage 1.4. tcp_conid_state usage 1.5. tcp_keepalive_enable usage 1.6. tcp_keepalive_disable usage 1.7. tcp_set_connection_lifetime usage 1.8. tcp_set_closed_event usage 1.9. tcp_get_conid usage 1.10. tcp_set_otcpid usage 1.11. tcp_set_otcpid_flag usage Chapter 1. Admin Guide Table of Contents 1. Overview 2. Parameters 2.1. closed_event (int) 2.2. event_callback (str) 3. Functions 3.1. tcp_conid_alive(conid) 3.2. tcp_conid_state(conid) 3.3. tcp_keepalive_enable([conid], idle, count, interval) 3.4. tcp_keepalive_disable([conid]) 3.5. tcp_set_connection_lifetime([conid], lifetime) 3.6. tcp_enable_closed_event([conid]) 3.7. tcp_get_conid(hostport, pvname) 3.8. tcp_set_otcpid(conid) 3.9. tcp_set_otcpid_flag(mode) 4. Event routes 4.1. tcp:closed 4.2. tcp:timeout 4.3. tcp:reset 4.4. Example 1. Overview This modules allows Kamailio to control the TCP connection options (such as the keepalive mechanism), on demand, and on a per-socket basis. Note: the keepalive functions only work on systems with the HAVE_TCP_KEEPIDLE, HAVE_TCP_KEEPCNT and HAVE_TCP_KEEPINTVL macros defined (Linux, FreeBSD, DragonFly BSD, NetBSD). 2. Parameters 2.1. closed_event (int) 2.2. event_callback (str) 2.1. closed_event (int) If set to 0 (globally disabled), the "tcp:closed" event route will never be called on TCP disconnections. If set to 1 (globally enabled), the "tcp:closed" event route will always be called on TCP disconnections. If set to 2 ("manual" mode), the "tcp:closed" event route will only be called on TCP connections for which tcp_enable_closed_event() has been applied, when a disconnection occurs. Default value is 1 (globally enabled). Example 1.1. Set closed_event parameter ... modparam("tcpops", "closed_event", 0) ... 2.2. event_callback (str) The name of the function in the kemi configuration file (embedded scripting language such as Lua, Python, ...) to be executed instead of event_route[...] blocks. The function receives a string parameter with the name of the event, the values are: 'tcp:closed', 'tcp:timeout', 'tcp:reset'. Default value is 'empty' (no function is executed for events). Example 1.2. Set event_callback parameter ... modparam("tcpops", "event_callback", "ksr_tcpops_event") ... -- event callback function implemented in Lua function ksr_tcpops_event(evname) KSR.info("===== evapi module triggered event: " .. evname .. "\n"); return 1; end ... 3. Functions 3.1. tcp_conid_alive(conid) 3.2. tcp_conid_state(conid) 3.3. tcp_keepalive_enable([conid], idle, count, interval) 3.4. tcp_keepalive_disable([conid]) 3.5. tcp_set_connection_lifetime([conid], lifetime) 3.6. tcp_enable_closed_event([conid]) 3.7. tcp_get_conid(hostport, pvname) 3.8. tcp_set_otcpid(conid) 3.9. tcp_set_otcpid_flag(mode) 3.1. tcp_conid_alive(conid) Check the state of a TCP or WS connection ID Meaning of the parameters is as follows: * conid (optional): the Kamailio internal connection id (as in the $conid pseudovariable). Return values: 1: Connection is OK -1: Connection has errors, does not exist or is about to be closed) Example 1.3. tcp_conid_alive usage ... $var(conid) = $conid; if(!tcp_conid_alive("$var(conid)")) { xlog("L_ERR", "Connection $conid can no longer be used\n"); } ... 3.2. tcp_conid_state(conid) Check the state of a TCP or WS connection ID Meaning of the parameters is as follows: * conid (optional): the Kamailio internal connection id (as in the $conid pseudovariable). Return values: 1: Connection is OK 2: Socket is accepting incoming connections 3: Socket is setting up outgoing connection -1: Connection does not exist (or was closed) -2: Socket has reached EOF -3: Socket error has occurred. Connection will likely close. -4: Socket is in unknown bad state. Connection will likely close. Example 1.4. tcp_conid_state usage ... if(!tcp_conid_state("$var(conid)")) { xlog("L_ERR", "Connection $conid is closed or malfunctional\n"); } ... 3.3. tcp_keepalive_enable([conid], idle, count, interval) Enables keepalive on a TCP connection. Meaning of the parameters is as follows: * conid (optional): the Kamailio internal connection id on which TCP keepalive will be enabled. If no parameter is given, the keepalive mechanism will be enabled on the current message source connection. * idle (seconds): the time before the first keepalive packet is sent out. * count: number of non-acked keepalive before resetting the connection. * interval (seconds): time between two keepalive probes. Returns 1 on success, -1 on failure. Example 1.5. tcp_keepalive_enable usage request_route { if (is_method("INVITE")) { $avp(caller_conid) = $conid; t_on_reply("foo"); } ... } onreply_route[foo] { if (is_method("INVITE") && status == 200) { # enable on callee's connection tcp_keepalive_enable("60", "5", "5"); # enable on caller's connection tcp_keepalive_enable("$avp(caller_conid)", "60", "5", "2"); } ... } 3.4. tcp_keepalive_disable([conid]) Disables keepalive on a TCP connection. Meaning of the parameters is as follows: * conid (optional): the Kamailio internal connection id on which TCP keepalive will be disabled. If no parameter is given, the keepalive mechanism will be disabled on the current message source connection. Returns 1 on success, -1 on failure. Example 1.6. tcp_keepalive_disable usage request_route { ... if (is_method("BYE")) { $avp(bye_conid) = $conid; t_on_reply("foo"); } ... } onreply_route[foo] { ... if (is_method("BYE") && status == 200) { tcp_keepalive_disable(); tcp_keepalive_disable("$avp(bye_conid)"); } ... } 3.5. tcp_set_connection_lifetime([conid], lifetime) Sets the connection lifetime of a connection (TCP). Meaning of the parameters is as follows: * conid (optional): the Kamailio internal connection id on which to set the new lifetime. If no parameter is given, it will be set on the current message source connection. * lifetime (seconds): the new connection lifetime. Returns 1 on success, -1 on failure. Example 1.7. tcp_set_connection_lifetime usage ... # use 10s as default lifetime tcp_connection_lifetime=10 ... request_route { ... if (is_method("REGISTER") && pv_www_authenticate("$td", "xxx", "0")) { # raise the TCP lifetime to a bigger value tcp_set_connection_lifetime("3605"); } ... } 3.6. tcp_enable_closed_event([conid]) Explicitly enables the "tcp:closed" event route on a TCP connection. Meaning of the parameters is as follows: * conid (optional): the Kamailio internal connection id. If no parameter is given, it will be enabled on the current message source connection. Returns 1 on success, -1 on failure. Example 1.8. tcp_set_closed_event usage ... # "tcp:closed" event route is "manual" mode modparam("tcpops", "closed_event", 2) ... request_route { ... if (is_method("REGISTER") && pv_www_authenticate("$td", "xxx", "0")) { # it will be called for this specific connection tcp_enable_closed_event(); } ... } event_route[tcp:closed] { xlog("connection $conid was closed"); } 3.7. tcp_get_conid(hostport, pvname) Get the connection id based on target host:port. The connection id is set in the variable named by pvname parameter. Meaning of the parameters is as follows: * hostport - target "host:port" address, the port can be omitted (default to 5060) and the parameter can contain variables. * pvname - target variable name. Return values: 1: connection was found -1: connection was not found or an error occurred Example 1.9. tcp_get_conid usage ... if(tcp_get_conid("127.0.0.1:5060", "$var(conid)")) { xlog("connection id is: $var(conid)\n"); } ... 3.8. tcp_set_otcpid(conid) Set the value for outbound tcp connection id. Meaning of the parameters is as follows: * conid - the value of tcp connection id. It can be an integer number or a variable holding an interver value. Return values: * 1: success * -1: failure Example 1.10. tcp_set_otcpid usage ... $var(conid) = 10; tcp_set_otcpid("$var(conid)"); ... 3.9. tcp_set_otcpid_flag(mode) Set or reset the internal flag for using or not the outbound tcp connection id for sending out. The outbound connection id can be set by module or by config using tcp_set_otcpid(...) function. An example of a module setting the otcpid is register via lookup location function, which sets the filed to the connection id used to receive the registration request. Meaning of the parameters is as follows: * mode - if 0, then the flag is reset, otherwise it is set. Return values: * 1: success * -1: failure Note: if you set the flag to use the outbound tcp connection id, then custom config changes to the destination address, like updating the r-uri ($ru) or dst uri ($du) are not resetting it, so the same already set connection id is used and the SIP request might be sent to the unexpected destination. Reset the flag in such case, if you set it previously. Example 1.11. tcp_set_otcpid_flag usage ... $var(cmode) = 1; tcp_set_otcpid_flag("$var(cmode)"); ... 4. Event routes 4.1. tcp:closed 4.2. tcp:timeout 4.3. tcp:reset 4.4. Example The 3 following routes are called when a socket is closed. The corresponding $conid , $Ri , $Rp , $si , $sp and $proto variable will be available in the event routes. Whether these routes are always called, never, or on a per socket basis is controlled by the closed_event parameter. 4.1. tcp:closed Called for each "normal" TCP socket closure by the other side (FIN,ACK). 4.2. tcp:timeout Called for connection timeouts (unanswered keepalives). 4.3. tcp:reset Called if the connection is reset by peer (RST). 4.4. Example ... event_route[tcp:closed] { xlog("L_INFO", "$proto connection closed ($conid)\n"); } event_route[tcp:timeout] { xlog("L_INFO", "$proto connection timed out ($conid)\n"); } event_route[tcp:reset] { xlog("L_INFO", "$proto connection reset by peer ($conid)\n"); } ...