#
#
# simple quick-start config script with dbtext
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -ddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)

check_via=no    # (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
children=4

listen=10.100.100.1
port=5060

# ------------------ module loading ----------------------------------

# use dbtext database
loadmodule "modules/dbtext/dbtext.so"

loadmodule "modules/sl/sl.so"
loadmodule "modules/tm/tm.so"
loadmodule "modules/rr/rr.so"
loadmodule "modules/maxfwd/maxfwd.so"
loadmodule "modules/usrloc/usrloc.so"
loadmodule "modules/registrar/registrar.so"
loadmodule "modules/textops/textops.so"
loadmodule "modules/jonrpcs/jsonrpcs.so"

# modules for digest authentication
loadmodule "modules/auth/auth.so"
loadmodule "modules/auth_db/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

# use dbtext database for persistent storage
modparam("usrloc", "db_mode", 2)
modparam("usrloc|auth_db", "db_url", "text:///tmp/kamailiodb")

# -- auth params --
#
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "user_column", "username")
modparam("auth_db", "domain_column", "domain")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{
    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        exit;
    };
    if (msg:len >=  max_len ) {
        sl_send_reply("513", "Message too big");
        exit;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER") record_route();

    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
        # mark routing logic in request
        append_hf("P-hint: rr-enforced\r\n");
        route(1);
        exit;
    };

    if (!uri==myself) {
        # mark routing logic in request
        append_hf("P-hint: outbound\r\n");
        route(1);
        exit;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {
        if (method=="REGISTER") {
            # digest authentication
            if (!www_authorize("", "subscriber")) {
                www_challenge("", "0");
                exit;
            };

            save("location");
            exit;
        };

        lookup("aliases");
        if (!uri==myself) {
            append_hf("P-hint: outbound alias\r\n");
            route(1);
            exit;
        };

        # native SIP destinations are handled using our USRLOC DB
        if (!lookup("location")) {
            sl_send_reply("404", "Not Found");
            exit;
        };
    };
    append_hf("P-hint: usrloc applied\r\n");
    route(1);
}

route[1]
{
    # send it out now; use stateful forwarding as it works reliably
    # even for UDP2TCP
    if (!t_relay()) {
        sl_reply_error();
    };
}