#!/usr/bin/make -f
# Sample debian/rules that uses debhelper.
# GNU copyright 1997 to 1999 by Joey Hess.
#
# $Id$
#
# History:
# --------
#  2003-05-30  updated for the 0.8.11 release, changed modules list and
#              some ser make options (andrei)
#  2003-06-27  changed to DH_COMPAT 4 (debian/compat) + other filenames
#              & small fixes (andrei)
#  2003-08-29  replaced modules-install with modules-install-all, to 
#               install also the modules doc (andrei)
#  2004-07-23  added ext and commented out the radius modules
#              (the current radius modules depend on radiusclient-ng which
#               is not yet part of debian)  (andrei)
#  2005-06-23  added cpl-c, pa & re-enabled radius (with libradiusclient-ng)
#                (andrei)


# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1

# This is the debhelper compatibility version to use.
# export DH_COMPAT=4
#  -- already set in compat
#  force no striping (always include debug symbols for now)
export DEB_BUILD_OPTIONS:="$(DEB_BUILD_OPTIONS) nostrip"

# modules not in the "main" package or unstable 
EXCLUDED_MODULES=	mysql jabber auth_radius group_radius uri_radius \
					avp_radius pa postgres snmp cpl cpl-c ext extcmd 

# modules depending on mysql
MYSQL_MODULES=mysql
#jabber related modules
JABBER_MODULES=jabber
#module depending on radiusclient
RADIUS_MODULES=auth_radius group_radius uri_radius avp_radius
#cpl related modules
CPL_MODULES=cpl-c
# pa related modules
PA_MODULES=pa
# postgres modules
POSTGRES_MODULES=postgres
# acc module
ACC_MODULE=acc

# the same but with path prepended (needed for modules="...")
MYSQL_MOD_PATH=$(addprefix modules/, $(MYSQL_MODULES))
JABBER_MOD_PATH=$(addprefix modules/, $(JABBER_MODULES))
RADIUS_MOD_PATH=$(addprefix modules/, $(RADIUS_MODULES))
CPL_MOD_PATH=$(addprefix modules/, $(CPL_MODULES))
PA_MOD_PATH=$(addprefix modules/, $(PA_MODULES))
POSTGRES_MOD_PATH=$(addprefix modules/, $(POSTGRES_MODULES))
ACC_MOD_PATH=$(addprefix modules/, $(ACC_MODULE))




ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
	CFLAGS += -g
endif
ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
	INSTALL_PROGRAM += -s
endif

configure: configure-stamp
configure-stamp:
	dh_testdir
	# Add here commands to configure the package.

	touch configure-stamp


build: build-stamp

build-stamp: configure-stamp 
	dh_testdir

	# Add here commands to compile the package.
	$(MAKE) all  skip_modules="$(EXCLUDED_MODULES)" cfg-target=/etc/ser/
	$(MAKE) modules modules="$(MYSQL_MOD_PATH)" cfg-target=/etc/ser/
	$(MAKE) modules modules="$(JABBER_MOD_PATH)" cfg-target=/etc/ser/
	$(MAKE) modules modules="$(RADIUS_MOD_PATH)" cfg-target=/etc/ser/
	$(MAKE) modules modules="$(CPL_MOD_PATH)" cfg-target=/etc/ser/
	$(MAKE) modules modules="$(PA_MOD_PATH)" cfg-target=/etc/ser/
	# postgres will generate lots of warnings
	$(MAKE) modules modules="$(POSTGRES_MOD_PATH)" cfg-target=/etc/ser/
	# acc-db & acc-radius are compiled on install, because they share
	#  the same source tree with acc
	#/usr/bin/docbook-to-man debian/ser.sgml > ser.1

	touch build-stamp

clean:
	dh_testdir
	dh_testroot
	rm -f build-stamp configure-stamp

	# Add here commands to clean up after the build process.
	-$(MAKE) \
		include_modules="$(MYSQL_MODULES) $(JABBER_MODULES) $(RADIUS_MODULES)\
							$(CPL_MODULES) $(PA_MODULES) $(POSTGRES_MODULES)"\
							proper

	dh_clean

install: build
	dh_testdir
	dh_testroot
	dh_clean -k
	dh_installdirs

	# Add here commands to install the package into debian/ser
	$(MAKE) install  skip_modules="$(EXCLUDED_MODULES)" \
		basedir=$(CURDIR)/debian/ser \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser \
		cfg-target=/etc/ser/
	# install only the mysql module
	$(MAKE) install-modules-all modules="$(MYSQL_MOD_PATH)"  \
		basedir=$(CURDIR)/debian/ser-mysql-module \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser-mysql-module \
		cfg-target=/etc/ser/ \
		doc-dir=share/doc/ser-mysql-module
	#install only the jabber module
	$(MAKE) install-modules-all modules="$(JABBER_MOD_PATH)"  \
		basedir=$(CURDIR)/debian/ser-jabber-module \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser-jabber-module \
		cfg-target=/etc/ser/ \
		doc-dir=share/doc/ser-jabber-module
	#install only the radius modules
	$(MAKE) install-modules-all modules="$(RADIUS_MOD_PATH)"  \
		basedir=$(CURDIR)/debian/ser-radius-modules \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser-radius-modules \
		cfg-target=/etc/ser/ \
		doc-dir=share/doc/ser-radius-modules
	#install only the cpl module
	$(MAKE) install-modules-all modules="$(CPL_MOD_PATH)"  \
		basedir=$(CURDIR)/debian/ser-cpl-module \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser-cpl-module \
		cfg-target=/etc/ser/ \
		doc-dir=share/doc/ser-cpl-module
	#install only the pa module
	$(MAKE) install-modules-all modules="$(PA_MOD_PATH)"  \
		basedir=$(CURDIR)/debian/ser-pa-module \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser-pa-module \
		cfg-target=/etc/ser/ \
		doc-dir=share/doc/ser-pa-module
	#install only the postgres module
	$(MAKE) install-modules-all modules="$(POSTGRES_MOD_PATH)"  \
		basedir=$(CURDIR)/debian/ser-postgres-module \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser-postgres-module \
		cfg-target=/etc/ser/ \
		doc-dir=share/doc/ser-postgres-module
	# Ugly hacks to make 2 new versions from acc: ac_db & acc_radius
	#install only the acc db version module
	cd $(ACC_MOD_PATH); $(MAKE) proper; cd ../..; \
	$(MAKE) install-modules-all modules="$(ACC_MOD_PATH)" \
		basedir=$(CURDIR)/debian/ser-acc-db-module \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser-acc-db-module \
		cfg-target=/etc/ser/ \
		doc-dir=share/doc/ser-acc-db-module \
		NAME=acc_db.so modules_names=acc_db.so EXTRA_DEFS=-DSQL_ACC ;\
	cd $(ACC_MOD_PATH); $(MAKE) proper NAME=acc_db.so; cd ../..
	#install only the acc radius version module
	$(MAKE) install-modules-all modules="$(ACC_MOD_PATH)"  \
		basedir=$(CURDIR)/debian/ser-acc-radius-module \
		prefix=/usr \
		cfg-prefix=$(CURDIR)/debian/ser-acc-radius-module \
		cfg-target=/etc/ser/ \
		doc-dir=share/doc/ser-acc-radius-module \
		NAME=acc_radius.so modules_names=acc_radius.so EXTRA_DEFS=-DRAD_ACC \
		LIBS=-lradiusclient-ng ; \
	cd $(ACC_MOD_PATH); $(MAKE) proper NAME=acc_radius.so; cd ../..
	#dh_movefiles



# This single target is used to build all the packages, all at once, or
# one at a time. So keep in mind: any options passed to commands here will
# affect _all_ packages. Anything you want to only affect one package
# should be put in another target, such as the install target.
binary-common: 
	dh_testdir
	dh_testroot
#	dh_installdebconf	
	dh_installdocs
	dh_installexamples
	dh_installmenu
#	dh_installlogrotate
#	dh_installemacsen
#	dh_installpam
#	dh_installmime
	dh_installinit  -- defaults 23
	dh_installcron
	dh_installman
	dh_installinfo
#	dh_undocumented
	dh_installchangelogs 
	dh_link
	dh_strip
	dh_compress 
	dh_fixperms
#	dh_makeshlibs
	dh_installdeb
#	dh_perl
	dh_shlibdeps
	dh_gencontrol
	dh_md5sums
	dh_builddeb

# Build architecture-independent packages using the common target
binary-indep: build install
# (Uncomment this next line if you have such packages.)
#        $(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
# We have nothing to do by default.


# Build architecture-dependent packages using the common target
binary-arch: build install
	$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common

# Any other binary targets build just one binary package at a time.
binary-%: build install
	$(MAKE) -f debian/rules binary-common DH_OPTIONS=-p$*

binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install configure