Browse code

* Core: Renamed ser.8 to sip-router.8

* Renamed ser.8 to sip-router.8.
* Small edits in sip-router.8.

Juha Heinanen authored on 24/06/2009 18:25:58
Showing 1 changed files
1 1
deleted file mode 100644
... ...
@@ -1,170 +0,0 @@
1
-.\" $Id$
2
-.TH sip-router 8 15.07.2002 sip-router "Sip Express Router" 
3
-.\" Process with
4
-.\" groff -man -Tascii sip-router.8
5
-.\"
6
-.SH NAME
7
-sip-router \- very fast and configurable sip proxy
8
-.SH SYNOPSIS
9
-.B sip-router
10
-[
11
-.B \-hcrRvdDEVT
12
-] [
13
-.BI \-f " config\-file"
14
-] [
15
-.BI \-l " address"
16
-] [
17
-.BI \-n " processes\-no"
18
-] [
19
-.BI \-N " tcp processes\-no"
20
-] [
21
-.BI \-b " max_rcv_buf_size"
22
-] [
23
-.BI \-m " shared_mem_size"
24
-] [
25
-.BI \-w " working\-dir"
26
-] [
27
-.BI \-t " chroot\-dir"
28
-] [
29
-.BI \-u " uid"
30
-] [
31
-.BI \-g " gid"
32
-] [
33
-.BI \-P " pid\-file"
34
-] [
35
-.BI \-L " modules-dir"
36
-]
37
-
38
-.SH DESCRIPTION
39
-.B sip-router 
40
-or
41
-.BR Sip
42
-.BR Express 
43
-.BR Router 
44
-is a very fast and configurable SIP proxy. 
45
-
46
-.SH OPTIONS
47
-.TP 12
48
-.B \-h
49
-Displays a short usage description, including all available options.
50
-.TP
51
-.BI \-c
52
-Checks the config file and displays the aliases and listen interface list.
53
-.TP
54
-.BI \-r
55
-Uses dns to check if it is necessary to add a "received=" field to a via.
56
-.TP
57
-.BI \-R
58
-Same as 
59
-.B \-r
60
-but uses reverse dns.
61
-.TP
62
-.BI \-v
63
-Turns on via host checking when forwarding replies.
64
-.TP
65
-.BI \-d
66
-Turns on debugging, multiple
67
-.B -d
68
-increase the debug level.
69
-.TP
70
-.BI \-D
71
-Runs sip-router in the foreground (it doesn't fork into daemon mode).
72
-.TP
73
-.BI \-E
74
-Sends all the log messages to stderr.
75
-.TP
76
-.BI \-T
77
-Disables TCP support.
78
-.TP
79
-.BI \-V
80
-Displays the version number.
81
-.TP
82
-.BI \-f " config\-file"
83
-Reads the configuration from 
84
-.B " config\-file" 
85
-(default
86
-.I  /etc/sip-router/sip-router.cfg
87
-).
88
-.TP
89
-.BI \-l " address"
90
-Listens on the specified address/interface. Multiple 
91
-.B \-l
92
-mean listening on multiple addresses. The address format is 
93
-[proto:]address[:port], where proto = udp|tcp and
94
-address = host|ip_address|interface_name. Example: -l localhost, 
95
--l udp:127.0.0.1:5080, -l eth0:5062.
96
-The default behaviour is to listen on all the ipv4 interfaces.
97
-.TP
98
-.BI \-n " processes\-no"
99
-Specifies the number of children processes forked per interface (default 8).
100
-.TP
101
-.BI \-N " tcp processes\-no"
102
-Specifies the number of children processes forked to handle tcp incoming connections (by default is equal to
103
-.BI \-n
104
-).
105
-.TP
106
-.BI \-b " max_rcv_buf_size"
107
-Maximum receive buffer size which will not be exceeded by the auto-probing procedure even if the OS allows.
108
-.TP
109
-.BI \-m " shared_mem_size"
110
-Size of the shared memory which will be allocated (in Megabytes).
111
-.TP
112
-.BI \-w " working\-dir" 
113
-Specifies the working directory. In the very improbable event that 
114
-.B sip-router 
115
-will crash, the core file will be generated here.
116
-.TP
117
-.BI \-t " chroot\-dir"
118
-Forces 
119
-.B sip-router 
120
-to chroot after reading the config file.
121
-.TP
122
-.BI \-u " uid"
123
-Changes the user id under which 
124
-.B sip-router
125
-runs.
126
-.TP
127
-.BI \-g " gid"
128
-Changes the group id under which 
129
-.B sip-router
130
-runs.
131
-.TP
132
-.BI \-P " pid\-file"
133
-Creates a file containing the pid of the main
134
-.B sip-router
135
-process.
136
-.TP
137
-.BI \-L " modules\-dir"
138
-Specifies the directory where to look for
139
-.B sip-router
140
-modules (default: /usr/lib/sip-router/modules)
141
-
142
-.SH FILES
143
-.PD 0
144
-.B /usr/sbin/sip-router
145
-.br
146
-.B /etc/sip-router/sip-router.cfg
147
-.br
148
-.B /usr/lib/sip-router/modules/*
149
-.PD
150
-.SH AUTHORS
151
-
152
-see 
153
-.B /usr/share/doc/sip-router/AUTHORS
154
-
155
-.SH SEE ALSO
156
-.BR sip-router.cfg(5)
157
-.PP
158
-Full documentation on sip-router, including configuration guidelines, FAQs and
159
-licensing conditions, is available at
160
-.I http://sip-router.org.
161
-.PP 
162
-For reporting  bugs see
163
-.I
164
-http://sip-router.org/tracker/.
165
-.PP
166
-Mailing lists:
167
-.nf 
168
-sr-users@lists.sip-router.org - sip-router user community
169
-.nf 
170
-sr-dev@lists.sip-router.org - sip-router development, new features and unstable version
Browse code

* Core, etc, documentation: renamed ser to sip-router

* Renamed ser to sip-router in Makefile, etc files and some core files.
* Renamed some etc files from ser based name to sip-router based name.

Juha Heinanen authored on 24/06/2009 12:44:10
Showing 1 changed files
... ...
@@ -1,12 +1,12 @@
1 1
 .\" $Id$
2
-.TH ser 8 15.07.2002 ser "Sip Express Router" 
2
+.TH sip-router 8 15.07.2002 sip-router "Sip Express Router" 
3 3
 .\" Process with
4
-.\" groff -man -Tascii ser.8
4
+.\" groff -man -Tascii sip-router.8
5 5
 .\"
6 6
 .SH NAME
7
-ser \- very fast and configurable sip proxy
7
+sip-router \- very fast and configurable sip proxy
8 8
 .SH SYNOPSIS
9
-.B ser
9
+.B sip-router
10 10
 [
11 11
 .B \-hcrRvdDEVT
12 12
 ] [
... ...
@@ -36,7 +36,7 @@ ser \- very fast and configurable sip proxy
36 36
 ]
37 37
 
38 38
 .SH DESCRIPTION
39
-.B ser 
39
+.B sip-router 
40 40
 or
41 41
 .BR Sip
42 42
 .BR Express 
... ...
@@ -68,7 +68,7 @@ Turns on debugging, multiple
68 68
 increase the debug level.
69 69
 .TP
70 70
 .BI \-D
71
-Runs ser in the foreground (it doesn't fork into daemon mode).
71
+Runs sip-router in the foreground (it doesn't fork into daemon mode).
72 72
 .TP
73 73
 .BI \-E
74 74
 Sends all the log messages to stderr.
... ...
@@ -83,7 +83,7 @@ Displays the version number.
83 83
 Reads the configuration from 
84 84
 .B " config\-file" 
85 85
 (default
86
-.I  /etc/ser/ser.cfg
86
+.I  /etc/sip-router/sip-router.cfg
87 87
 ).
88 88
 .TP
89 89
 .BI \-l " address"
... ...
@@ -111,60 +111,60 @@ Size of the shared memory which will be allocated (in Megabytes).
111 111
 .TP
112 112
 .BI \-w " working\-dir" 
113 113
 Specifies the working directory. In the very improbable event that 
114
-.B ser 
114
+.B sip-router 
115 115
 will crash, the core file will be generated here.
116 116
 .TP
117 117
 .BI \-t " chroot\-dir"
118 118
 Forces 
119
-.B ser 
119
+.B sip-router 
120 120
 to chroot after reading the config file.
121 121
 .TP
122 122
 .BI \-u " uid"
123 123
 Changes the user id under which 
124
-.B ser
124
+.B sip-router
125 125
 runs.
126 126
 .TP
127 127
 .BI \-g " gid"
128 128
 Changes the group id under which 
129
-.B ser
129
+.B sip-router
130 130
 runs.
131 131
 .TP
132 132
 .BI \-P " pid\-file"
133 133
 Creates a file containing the pid of the main
134
-.B ser
134
+.B sip-router
135 135
 process.
136 136
 .TP
137 137
 .BI \-L " modules\-dir"
138 138
 Specifies the directory where to look for
139
-.B ser
140
-modules (default: /usr/lib/ser/modules)
139
+.B sip-router
140
+modules (default: /usr/lib/sip-router/modules)
141 141
 
142 142
 .SH FILES
143 143
 .PD 0
144
-.B /usr/sbin/ser
144
+.B /usr/sbin/sip-router
145 145
 .br
146
-.B /etc/ser/ser.cfg
146
+.B /etc/sip-router/sip-router.cfg
147 147
 .br
148
-.B /usr/lib/ser/modules/*
148
+.B /usr/lib/sip-router/modules/*
149 149
 .PD
150 150
 .SH AUTHORS
151 151
 
152 152
 see 
153
-.B /usr/share/doc/ser/AUTHORS
153
+.B /usr/share/doc/sip-router/AUTHORS
154 154
 
155 155
 .SH SEE ALSO
156
-.BR ser.cfg(5)
156
+.BR sip-router.cfg(5)
157 157
 .PP
158
-Full documentation on ser, including configuration guidelines, FAQs and
158
+Full documentation on sip-router, including configuration guidelines, FAQs and
159 159
 licensing conditions, is available at
160
-.I http://www.iptel.org/ser/.
160
+.I http://sip-router.org.
161 161
 .PP 
162 162
 For reporting  bugs see
163 163
 .I
164
-http://www.iptel.org/ser/bugs/.
164
+http://sip-router.org/tracker/.
165 165
 .PP
166 166
 Mailing lists:
167 167
 .nf 
168
-serusers@iptel.org - ser user community
168
+sr-users@lists.sip-router.org - sip-router user community
169 169
 .nf 
170
-serdev@iptel.org - ser development, new features and unstable version
170
+sr-dev@lists.sip-router.org - sip-router development, new features and unstable version
Browse code

added `-L' option

Ondrej Martinek authored on 19/11/2007 17:31:24
Showing 1 changed files
... ...
@@ -31,6 +31,8 @@ ser \- very fast and configurable sip proxy
31 31
 .BI \-g " gid"
32 32
 ] [
33 33
 .BI \-P " pid\-file"
34
+] [
35
+.BI \-L " modules-dir"
34 36
 ]
35 37
 
36 38
 .SH DESCRIPTION
... ...
@@ -124,14 +126,18 @@ runs.
124 126
 .TP
125 127
 .BI \-g " gid"
126 128
 Changes the group id under which 
127
-.B ser 
129
+.B ser
128 130
 runs.
129 131
 .TP
130 132
 .BI \-P " pid\-file"
131
-Creates a file containing the pid of the main 
132
-.B ser 
133
+Creates a file containing the pid of the main
134
+.B ser
133 135
 process.
134
-
136
+.TP
137
+.BI \-L " modules\-dir"
138
+Specifies the directory where to look for
139
+.B ser
140
+modules (default: /usr/lib/ser/modules)
135 141
 
136 142
 .SH FILES
137 143
 .PD 0
Browse code

- remove fifo and unixsock related description

Jan Janak authored on 21/12/2005 17:27:49
Showing 1 changed files
... ...
@@ -31,10 +31,6 @@ ser \- very fast and configurable sip proxy
31 31
 .BI \-g " gid"
32 32
 ] [
33 33
 .BI \-P " pid\-file"
34
-] [
35
-.BI \-i " fifo\-path"
36
-] [
37
-.BI \-x " socket\-path"
38 34
 ]
39 35
 
40 36
 .SH DESCRIPTION
... ...
@@ -135,18 +131,6 @@ runs.
135 131
 Creates a file containing the pid of the main 
136 132
 .B ser 
137 133
 process.
138
-.TP
139
-.BI \-i " fifo\-path"
140
-Creates a fifo, usefull for monitoring
141
-.B ser
142
-status.
143
-.TP
144
-.BI \-x " socket\-path"
145
-Creates a unix socket, usefull for monitoring
146
-.B ser
147
-status ( same as
148
-.BI \-i " fifo\-path" 
149
-but using instead unix sockets).
150 134
 
151 135
 
152 136
 .SH FILES
Browse code

- various pre-release updates - use_domain set to 0 by default in all the modules - experimental sparc32 non-SMP support (thanks to Michael Grigoni)

Andrei Pelinescu-Onciul authored on 16/12/2004 17:39:46
Showing 1 changed files
... ...
@@ -13,9 +13,6 @@ ser \- very fast and configurable sip proxy
13 13
 .BI \-f " config\-file"
14 14
 ] [
15 15
 .BI \-l " address"
16
-[ 
17
-.BI \-p " port"
18
-] ]...
19 16
 ] [
20 17
 .BI \-n " processes\-no"
21 18
 ] [
... ...
@@ -36,6 +33,8 @@ ser \- very fast and configurable sip proxy
36 33
 .BI \-P " pid\-file"
37 34
 ] [
38 35
 .BI \-i " fifo\-path"
36
+] [
37
+.BI \-x " socket\-path"
39 38
 ]
40 39
 
41 40
 .SH DESCRIPTION
... ...
@@ -90,15 +89,13 @@ Reads the configuration from
90 89
 ).
91 90
 .TP
92 91
 .BI \-l " address"
93
-Listens on the specified address. Multiple 
94
-.B \-l
95
-mean listening on multiple addresses. The default behaviour is to listen on all the ipv4 interfaces.
96
-.TP
97
-.BI \-p " port"
98
-Listens on the specified port (default 5060). It applies to the last address specified with
92
+Listens on the specified address/interface. Multiple 
99 93
 .B \-l
100
-and to all the following that do not have a corresponding 
101
-.B \-p.
94
+mean listening on multiple addresses. The address format is 
95
+[proto:]address[:port], where proto = udp|tcp and
96
+address = host|ip_address|interface_name. Example: -l localhost, 
97
+-l udp:127.0.0.1:5080, -l eth0:5062.
98
+The default behaviour is to listen on all the ipv4 interfaces.
102 99
 .TP
103 100
 .BI \-n " processes\-no"
104 101
 Specifies the number of children processes forked per interface (default 8).
... ...
@@ -143,6 +140,13 @@ process.
143 140
 Creates a fifo, usefull for monitoring
144 141
 .B ser
145 142
 status.
143
+.TP
144
+.BI \-x " socket\-path"
145
+Creates a unix socket, usefull for monitoring
146
+.B ser
147
+status ( same as
148
+.BI \-i " fifo\-path" 
149
+but using instead unix sockets).
146 150
 
147 151
 
148 152
 .SH FILES
... ...
@@ -174,6 +178,3 @@ Mailing lists:
174 178
 serusers@iptel.org - ser user community
175 179
 .nf 
176 180
 serdev@iptel.org - ser development, new features and unstable version
177
-.PP
178
-For help/support, write an email to <serhelp@iptel.org>.
179
-
Browse code

- install-man will automatically "fix" the path of the files referred in the man pages - switched to /dev/urandom instead of /dev/random (/dev/random blocks if it haven't gathered enough entropy and is is not present on all the systems) - minor man pages fixes

Andrei Pelinescu-Onciul authored on 02/09/2004 13:42:28
Showing 1 changed files
... ...
@@ -86,7 +86,7 @@ Displays the version number.
86 86
 Reads the configuration from 
87 87
 .B " config\-file" 
88 88
 (default
89
-.I  ./ser.cfg
89
+.I  /etc/ser/ser.cfg
90 90
 ).
91 91
 .TP
92 92
 .BI \-l " address"
... ...
@@ -154,31 +154,9 @@ status.
154 154
 .B /usr/lib/ser/modules/*
155 155
 .PD
156 156
 .SH AUTHORS
157
-Andrei Pelinescu - Onciul, <pelinescu-onciul@fokus.gmd.de>
158
-.br
159
-Bogdan Andrei Iancu
160
-.br
161
-Daniel-Constantin Mierla
162
-.br 
163
-Jan Janak
164
-.br
165
-Jiri Kuthan
166
-.br
167
-Juha Heinanen
168
-.br
169
-Maxim Sobolev
170
-.br
171
-Miklos Tirpak
172
-.br
173
-Nils Ohlmeier
174
-.br
175
-Ramona-Elena Modroiu
176
-.br
177
-Raphael Coeffic
178
-.br
179
-Ricardo Baratto
180
-.br
181
-Stelios Sidiroglou-Douskos
157
+
158
+see 
159
+.B /usr/share/doc/ser/AUTHORS
182 160
 
183 161
 .SH SEE ALSO
184 162
 .BR ser.cfg(5)
Browse code

- if () {} do not have to be followed by ';' anymore - added switch to check the config file (-c) and display aliases and listen interface list if the config is ok. - changes: removed len_gt() and replaced with if (msg:len op number|max_len) - more operators supported: != for special operations (e.g. myself or ip comparisons), != for strings (==, !=, ~=), !=, >, <, >=, <= for numbers (e.g msg:len >= max_len). - updated NEWS

Andrei Pelinescu-Onciul authored on 12/10/2003 15:09:08
Showing 1 changed files
... ...
@@ -52,7 +52,7 @@ is a very fast and configurable SIP proxy.
52 52
 Displays a short usage description, including all available options.
53 53
 .TP
54 54
 .BI \-c
55
-Performs loop checks and computes branches.
55
+Checks the config file and displays the aliases and listen interface list.
56 56
 .TP
57 57
 .BI \-r
58 58
 Uses dns to check if it is necessary to add a "received=" field to a via.
Browse code

- Makefile, AUTHORS, man pages merged from stable

Andrei Pelinescu-Onciul authored on 03/09/2003 15:03:22
Showing 1 changed files
... ...
@@ -156,17 +156,27 @@ status.
156 156
 .SH AUTHORS
157 157
 Andrei Pelinescu - Onciul, <pelinescu-onciul@fokus.gmd.de>
158 158
 .br
159
-Bogdan Andrei Iancu;
159
+Bogdan Andrei Iancu
160 160
 .br
161
-Daniel-Constantin Mierla;
161
+Daniel-Constantin Mierla
162 162
 .br 
163
-Jan Janak;
163
+Jan Janak
164 164
 .br
165
-Jiri Kuthan;
165
+Jiri Kuthan
166 166
 .br
167
-Nils Ohlmeier;
167
+Juha Heinanen
168 168
 .br
169
-Ricardo Baratto;
169
+Maxim Sobolev
170
+.br
171
+Miklos Tirpak
172
+.br
173
+Nils Ohlmeier
174
+.br
175
+Ramona-Elena Modroiu
176
+.br
177
+Raphael Coeffic
178
+.br
179
+Ricardo Baratto
170 180
 .br
171 181
 Stelios Sidiroglou-Douskos
172 182
 
... ...
@@ -175,10 +185,17 @@ Stelios Sidiroglou-Douskos
175 185
 .PP
176 186
 Full documentation on ser, including configuration guidelines, FAQs and
177 187
 licensing conditions, is available at
178
-http://www.iptel.org/ser/.
188
+.I http://www.iptel.org/ser/.
179 189
 .PP 
180
-Report bugs at
181
-.nf
182
-https://developer.berlios.de/bugs/?func=addbug&group_id=480 .
183
-.br
184
-For help/support, write an email to <serhelp@iptel.org> or <seruser@iptel.org>.
190
+For reporting  bugs see
191
+.I
192
+http://www.iptel.org/ser/bugs/.
193
+.PP
194
+Mailing lists:
195
+.nf 
196
+serusers@iptel.org - ser user community
197
+.nf 
198
+serdev@iptel.org - ser development, new features and unstable version
199
+.PP
200
+For help/support, write an email to <serhelp@iptel.org>.
201
+
Browse code

- added disable tcp support (-T or disable_tcp=yes in the cfg) - the number of tcp "worker" processes is now setable (-N or tcp_children=NN) - replaced get_out_socket w/ get_send_socket in tm/uac.c & fixed some proto stuff (proto was not set properly when called w/ PROTO_NONE) - updated man pages & INSTALL

Andrei Pelinescu-Onciul authored on 15/04/2003 20:39:37
Showing 1 changed files
... ...
@@ -8,7 +8,7 @@ ser \- very fast and configurable sip proxy
8 8
 .SH SYNOPSIS
9 9
 .B ser
10 10
 [
11
-.B \-hcrRvdDEV
11
+.B \-hcrRvdDEVT
12 12
 ] [
13 13
 .BI \-f " config\-file"
14 14
 ] [
... ...
@@ -19,6 +19,8 @@ ser \- very fast and configurable sip proxy
19 19
 ] [
20 20
 .BI \-n " processes\-no"
21 21
 ] [
22
+.BI \-N " tcp processes\-no"
23
+] [
22 24
 .BI \-b " max_rcv_buf_size"
23 25
 ] [
24 26
 .BI \-m " shared_mem_size"
... ...
@@ -74,6 +76,9 @@ Runs ser in the foreground (it doesn't fork into daemon mode).
74 76
 .BI \-E
75 77
 Sends all the log messages to stderr.
76 78
 .TP
79
+.BI \-T
80
+Disables TCP support.
81
+.TP
77 82
 .BI \-V
78 83
 Displays the version number.
79 84
 .TP
... ...
@@ -98,6 +103,11 @@ and to all the following that do not have a corresponding
98 103
 .BI \-n " processes\-no"
99 104
 Specifies the number of children processes forked per interface (default 8).
100 105
 .TP
106
+.BI \-N " tcp processes\-no"
107
+Specifies the number of children processes forked to handle tcp incoming connections (by default is equal to
108
+.BI \-n
109
+).
110
+.TP
101 111
 .BI \-b " max_rcv_buf_size"
102 112
 Maximum receive buffer size which will not be exceeded by the auto-probing procedure even if the OS allows.
103 113
 .TP
... ...
@@ -171,4 +181,4 @@ Report bugs at
171 181
 .nf
172 182
 https://developer.berlios.de/bugs/?func=addbug&group_id=480 .
173 183
 .br
174
-For help/support, write an email to <serhelp@iptel.org>. 
184
+For help/support, write an email to <serhelp@iptel.org> or <seruser@iptel.org>.
Browse code

- minor serdev doc edits - removed fifo default value - added -i fifo_path parameter - updated man page

Andrei Pelinescu-Onciul authored on 25/09/2002 10:03:20
Showing 1 changed files
... ...
@@ -32,6 +32,8 @@ ser \- very fast and configurable sip proxy
32 32
 .BI \-g " gid"
33 33
 ] [
34 34
 .BI \-P " pid\-file"
35
+] [
36
+.BI \-i " fifo\-path"
35 37
 ]
36 38
 
37 39
 .SH DESCRIPTION
... ...
@@ -126,6 +128,11 @@ runs.
126 128
 Creates a file containing the pid of the main 
127 129
 .B ser 
128 130
 process.
131
+.TP
132
+.BI \-i " fifo\-path"
133
+Creates a fifo, usefull for monitoring
134
+.B ser
135
+status.
129 136
 
130 137
 
131 138
 .SH FILES
Browse code

- updated man pages

Andrei Pelinescu-Onciul authored on 20/09/2002 16:19:02
Showing 1 changed files
... ...
@@ -4,7 +4,7 @@
4 4
 .\" groff -man -Tascii ser.8
5 5
 .\"
6 6
 .SH NAME
7
-ser \- SIP Express Router, very fast and configurable sip proxy 
7
+ser \- very fast and configurable sip proxy
8 8
 .SH SYNOPSIS
9 9
 .B ser
10 10
 [
... ...
@@ -85,8 +85,7 @@ Reads the configuration from
85 85
 .BI \-l " address"
86 86
 Listens on the specified address. Multiple 
87 87
 .B \-l
88
-mean listening on multiple addresses. The default behaviour is to listen on the address returned by 
89
-.BR uname(2).
88
+mean listening on multiple addresses. The default behaviour is to listen on all the ipv4 interfaces.
90 89
 .TP
91 90
 .BI \-p " port"
92 91
 Listens on the specified port (default 5060). It applies to the last address specified with
... ...
@@ -138,11 +137,21 @@ process.
138 137
 .B /usr/lib/ser/modules/*
139 138
 .PD
140 139
 .SH AUTHORS
141
-This manual page was written by Andrei Pelinescu - Onciul <pelinescu-onciul@fokus.gmd.de>.
140
+Andrei Pelinescu - Onciul, <pelinescu-onciul@fokus.gmd.de>
142 141
 .br
143
-.B ser
144
-was written by Andrei Pelinescu - Onciul, Bogdan Iancu, Daniel-Constantin Mierla,
145
-Jan Janak, Jiri Kuthan, Nils Ohlmeier, Ricardo Baratto, Stelios Sidiroglou-Douskos.
142
+Bogdan Andrei Iancu;
143
+.br
144
+Daniel-Constantin Mierla;
145
+.br 
146
+Jan Janak;
147
+.br
148
+Jiri Kuthan;
149
+.br
150
+Nils Ohlmeier;
151
+.br
152
+Ricardo Baratto;
153
+.br
154
+Stelios Sidiroglou-Douskos
146 155
 
147 156
 .SH SEE ALSO
148 157
 .BR ser.cfg(5)
... ...
@@ -151,5 +160,8 @@ Full documentation on ser, including configuration guidelines, FAQs and
151 160
 licensing conditions, is available at
152 161
 http://www.iptel.org/ser/.
153 162
 .PP 
154
-Report bugs at https://developer.berlios.de/bugs/?func=addbug&group_id=480 .
163
+Report bugs at
164
+.nf
165
+https://developer.berlios.de/bugs/?func=addbug&group_id=480 .
166
+.br
155 167
 For help/support, write an email to <serhelp@iptel.org>. 
Jiri Kuthan authored on 04/09/2002 11:16:43
Showing 1 changed files
... ...
@@ -147,8 +147,9 @@ Jan Janak, Jiri Kuthan, Nils Ohlmeier, Ricardo Baratto, Stelios Sidiroglou-Dousk
147 147
 .SH SEE ALSO
148 148
 .BR ser.cfg(5)
149 149
 .PP
150
-Full documentation on ser, including configuration and FAQs is available at
151
-http://www.iptel.org/ser/doc.
150
+Full documentation on ser, including configuration guidelines, FAQs and
151
+licensing conditions, is available at
152
+http://www.iptel.org/ser/.
152 153
 .PP 
153
-Report bugs at https://developer.berlios.de/bugs/?func=addbug&group_id=480
154
+Report bugs at https://developer.berlios.de/bugs/?func=addbug&group_id=480 .
154 155
 For help/support, write an email to <serhelp@iptel.org>. 
Browse code

addressed introduced

Jiri Kuthan authored on 04/09/2002 11:11:25
Showing 1 changed files
... ...
@@ -138,16 +138,17 @@ process.
138 138
 .B /usr/lib/ser/modules/*
139 139
 .PD
140 140
 .SH AUTHORS
141
-This manual page was written by Andrei Pelinescu - Onciul <pelinescu-onciul@fokus.gmd.de>, ...
141
+This manual page was written by Andrei Pelinescu - Onciul <pelinescu-onciul@fokus.gmd.de>.
142 142
 .br
143 143
 .B ser
144
-was written by:
144
+was written by Andrei Pelinescu - Onciul, Bogdan Iancu, Daniel-Constantin Mierla,
145
+Jan Janak, Jiri Kuthan, Nils Ohlmeier, Ricardo Baratto, Stelios Sidiroglou-Douskos.
145 146
 
146 147
 .SH SEE ALSO
147 148
 .BR ser.cfg(5)
148 149
 .PP
149 150
 Full documentation on ser, including configuration and FAQs is available at
150
-http://www.iptel.org/<fill-this-in>.
151
+http://www.iptel.org/ser/doc.
151 152
 .PP 
152
-Report bugs at http://www.iptel.org/<fill-this-in>
153
-For help/support, try the <ser> mailing list at <fill-this-in>.
153
+Report bugs at https://developer.berlios.de/bugs/?func=addbug&group_id=480
154
+For help/support, write an email to <serhelp@iptel.org>. 
Browse code

- updated README and ser.8 - added scheletal man page for ser.cfg.5.

Andrei Pelinescu-Onciul authored on 15/07/2002 14:34:57
Showing 1 changed files
... ...
@@ -1,7 +1,7 @@
1 1
 .\" $Id$
2
-.TH ser 8 14.07.2002 ser "Sip Express Router" 
2
+.TH ser 8 15.07.2002 ser "Sip Express Router" 
3 3
 .\" Process with
4
-.\" groff -man -Tascii ser.1 
4
+.\" groff -man -Tascii ser.8
5 5
 .\"
6 6
 .SH NAME
7 7
 ser \- SIP Express Router, very fast and configurable sip proxy 
... ...
@@ -144,7 +144,7 @@ This manual page was written by Andrei Pelinescu - Onciul <pelinescu-onciul@foku
144 144
 was written by:
145 145
 
146 146
 .SH SEE ALSO
147
-.BR ser.cfg(8)
147
+.BR ser.cfg(5)
148 148
 .PP
149 149
 Full documentation on ser, including configuration and FAQs is available at
150 150
 http://www.iptel.org/<fill-this-in>.
Browse code

- added GNU GPL copy (COPYING) - file copyright notice draft (test/file_copyright) - man page for ser

Andrei Pelinescu-Onciul authored on 14/07/2002 21:06:17
Showing 1 changed files
1 1
new file mode 100644
... ...
@@ -0,0 +1,153 @@
1
+.\" $Id$
2
+.TH ser 8 14.07.2002 ser "Sip Express Router" 
3
+.\" Process with
4
+.\" groff -man -Tascii ser.1 
5
+.\"
6
+.SH NAME
7
+ser \- SIP Express Router, very fast and configurable sip proxy 
8
+.SH SYNOPSIS
9
+.B ser
10
+[
11
+.B \-hcrRvdDEV
12
+] [
13
+.BI \-f " config\-file"
14
+] [
15
+.BI \-l " address"
16
+[ 
17
+.BI \-p " port"
18
+] ]...
19
+] [
20
+.BI \-n " processes\-no"
21
+] [
22
+.BI \-b " max_rcv_buf_size"
23
+] [
24
+.BI \-m " shared_mem_size"
25
+] [
26
+.BI \-w " working\-dir"
27
+] [
28
+.BI \-t " chroot\-dir"
29
+] [
30
+.BI \-u " uid"
31
+] [
32
+.BI \-g " gid"
33
+] [
34
+.BI \-P " pid\-file"
35
+]
36
+
37
+.SH DESCRIPTION
38
+.B ser 
39
+or
40
+.BR Sip
41
+.BR Express 
42
+.BR Router 
43
+is a very fast and configurable SIP proxy. 
44
+
45
+.SH OPTIONS
46
+.TP 12
47
+.B \-h
48
+Displays a short usage description, including all available options.
49
+.TP
50
+.BI \-c
51
+Performs loop checks and computes branches.
52
+.TP
53
+.BI \-r
54
+Uses dns to check if it is necessary to add a "received=" field to a via.
55
+.TP
56
+.BI \-R
57
+Same as 
58
+.B \-r
59
+but uses reverse dns.
60
+.TP
61
+.BI \-v
62
+Turns on via host checking when forwarding replies.
63
+.TP
64
+.BI \-d
65
+Turns on debugging, multiple
66
+.B -d
67
+increase the debug level.
68
+.TP
69
+.BI \-D
70
+Runs ser in the foreground (it doesn't fork into daemon mode).
71
+.TP
72
+.BI \-E
73
+Sends all the log messages to stderr.
74
+.TP
75
+.BI \-V
76
+Displays the version number.
77
+.TP
78
+.BI \-f " config\-file"
79
+Reads the configuration from 
80
+.B " config\-file" 
81
+(default
82
+.I  ./ser.cfg
83
+).
84
+.TP
85
+.BI \-l " address"
86
+Listens on the specified address. Multiple 
87
+.B \-l
88
+mean listening on multiple addresses. The default behaviour is to listen on the address returned by 
89
+.BR uname(2).
90
+.TP
91
+.BI \-p " port"
92
+Listens on the specified port (default 5060). It applies to the last address specified with
93
+.B \-l
94
+and to all the following that do not have a corresponding 
95
+.B \-p.
96
+.TP
97
+.BI \-n " processes\-no"
98
+Specifies the number of children processes forked per interface (default 8).
99
+.TP
100
+.BI \-b " max_rcv_buf_size"
101
+Maximum receive buffer size which will not be exceeded by the auto-probing procedure even if the OS allows.
102
+.TP
103
+.BI \-m " shared_mem_size"
104
+Size of the shared memory which will be allocated (in Megabytes).
105
+.TP
106
+.BI \-w " working\-dir" 
107
+Specifies the working directory. In the very improbable event that 
108
+.B ser 
109
+will crash, the core file will be generated here.
110
+.TP
111
+.BI \-t " chroot\-dir"
112
+Forces 
113
+.B ser 
114
+to chroot after reading the config file.
115
+.TP
116
+.BI \-u " uid"
117
+Changes the user id under which 
118
+.B ser
119
+runs.
120
+.TP
121
+.BI \-g " gid"
122
+Changes the group id under which 
123
+.B ser 
124
+runs.
125
+.TP
126
+.BI \-P " pid\-file"
127
+Creates a file containing the pid of the main 
128
+.B ser 
129
+process.
130
+
131
+
132
+.SH FILES
133
+.PD 0
134
+.B /usr/sbin/ser
135
+.br
136
+.B /etc/ser/ser.cfg
137
+.br
138
+.B /usr/lib/ser/modules/*
139
+.PD
140
+.SH AUTHORS
141
+This manual page was written by Andrei Pelinescu - Onciul <pelinescu-onciul@fokus.gmd.de>, ...
142
+.br
143
+.B ser
144
+was written by:
145
+
146
+.SH SEE ALSO
147
+.BR ser.cfg(8)
148
+.PP
149
+Full documentation on ser, including configuration and FAQs is available at
150
+http://www.iptel.org/<fill-this-in>.
151
+.PP 
152
+Report bugs at http://www.iptel.org/<fill-this-in>
153
+For help/support, try the <ser> mailing list at <fill-this-in>.