rpm/ser.init.SuSE
4785b6d7
 #! /bin/sh
 # Copyright (c) 2002 Frauenhofer Gesellschaft FOKUS, Germany.
21a5159f
 # All rights reserved.
4785b6d7
 #
 # Author: Nils Ohlmeier <ohlmeier@fokus.fhg.de>
 #
 # /etc/init.d/ser
 #
 ### BEGIN INIT INFO
21a5159f
 # Provides:          sip
 # Required-Start:    $network
 # X-UnitedLinux-Should-Start: $network
 # Required-Stop:     $network
 # X-UnitedLinux-Should-Stop: $network
 # Default-Start:     3 5
 # Default-Stop:      0 1 2 6
 # Short-Description: SIP Express Router
 # Description:       Start SER and provide the routing of SIP requests.
4785b6d7
 ### END INIT INFO
 
 
21a5159f
 # Check for missing binaries (stale symlinks should not happen)
4785b6d7
 SER_BIN=/usr/sbin/ser
 test -x $SER_BIN || exit 5
 
21a5159f
 # Check for existence of needed config file and read it
 SER_CONFIG=/etc/ser/ser.cfg
 test -r $SER_CONFIG || exit 6
 #. $FOO_CONFIG
 
4785b6d7
 # Shell functions sourced from /etc/rc.status:
 #      rc_check         check and set local and overall rc status
 #      rc_status        check and set local and overall rc status
 #      rc_status -v     ditto but be verbose in local rc status
 #      rc_status -v -r  ditto and clear the local rc status
21a5159f
 #      rc_status -s     display "skipped" and exit with status 3
 #      rc_status -u     display "unused" and exit with status 3
4785b6d7
 #      rc_failed        set local and overall rc status to failed
21a5159f
 #      rc_failed <num>  set local and overall rc status to <num>
4785b6d7
 #      rc_reset         clear local rc status (overall remains)
 #      rc_exit          exit appropriate to overall rc status
21a5159f
 #      rc_active	checks whether a service is activated by symlinks
 #      rc_splash arg    sets the boot splash screen to arg (if active)
4785b6d7
 . /etc/rc.status
 
21a5159f
 # Reset status of this service
4785b6d7
 rc_reset
 
 # Return values acc. to LSB for all commands but status:
21a5159f
 # 0	  - success
 # 1       - generic or unspecified error
 # 2       - invalid or excess argument(s)
 # 3       - unimplemented feature (e.g. "reload")
 # 4       - user had insufficient privileges
 # 5       - program is not installed
 # 6       - program is not configured
 # 7       - program is not running
 # 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
4785b6d7
 # 
 # Note that starting an already running service, stopping
 # or restarting a not-running service as well as the restart
21a5159f
 # with force-reload (in case signaling is not supported) are
4785b6d7
 # considered a success.
 
 case "$1" in
     start)
21a5159f
 	echo -n "Starting SIP Express Router "
4785b6d7
 	## Start daemon with startproc(8). If this fails
21a5159f
 	## the return value is set appropriately by startproc.
ed1dbcc2
 	startproc $SER_BIN -f $SER_CONFIG
4785b6d7
 
 	# Remember status and be verbose
 	rc_status -v
 	;;
     stop)
21a5159f
 	echo -n "Shutting down SIP Express Router "
4785b6d7
 	## Stop daemon with killproc(8) and if this fails
21a5159f
 	## killproc sets the return value according to LSB.
4785b6d7
 
 	killproc -TERM $SER_BIN
 
 	# Remember status and be verbose
 	rc_status -v
 	;;
     restart)
 	## Stop the service and regardless of whether it was
 	## running or not, start it again.
 	$0 stop
 	$0 start
 
 	# Remember status and be quiet
 	rc_status
 	;;
     force-reload)
 	## Signal the daemon to reload its config. Most daemons
 	## do this on signal 1 (SIGHUP).
 	## If it does not support it, restart.
 
21a5159f
 	echo -n "Reload service SIP Express Router "
4785b6d7
 	## Otherwise:
 	$0 stop  &&  $0 start
 	rc_status
 	;;
     reload)
 	## Like force-reload, but if daemon does not support
21a5159f
 	## signaling, do nothing (!)
4785b6d7
 
 	## Otherwise if it does not support reload:
 	rc_failed 3
 	rc_status -v
 	;;
     status)
21a5159f
 	echo -n "Checking for service SIP Express Router "
4785b6d7
 	## Check status with checkproc(8), if process is running
 	## checkproc will return with exit status 0.
 
21a5159f
 	# Return value is slightly different for the status command:
 	# 0 - service up and running
4785b6d7
 	# 1 - service dead, but /var/run/  pid  file exists
 	# 2 - service dead, but /var/lock/ lock file exists
21a5159f
 	# 3 - service not running (unused)
 	# 4 - service status unknown :-(
 	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
 	
4785b6d7
 	# NOTE: checkproc returns LSB compliant status values.
 	checkproc $SER_BIN
21a5159f
 	# NOTE: rc_status knows that we called this init script with
 	# "status" option and adapts its messages accordingly.
4785b6d7
 	rc_status -v
 	;;
     *)
 	echo "Usage: $0 {start|stop|status|restart}"
 	exit 1
 	;;
 esac
 rc_exit