name mode size
..
doc 040000
km_doc 040000
Makefile 100644 814B
README 100644 17.01kB
bdb_cmd.c 100644 11.91kB
bdb_cmd.h 100644 2.87kB
bdb_con.c 100644 4.01kB
bdb_con.h 100644 2.66kB
bdb_crs_compat.h 100644 1.36kB
bdb_fld.c 100644 1.89kB
bdb_fld.h 100644 1.74kB
bdb_lib.c 100644 28.63kB
bdb_lib.h 100644 5.02kB
bdb_mod.c 100644 3.4kB
bdb_mod.h 100644 1.2kB
bdb_res.c 100644 1.96kB
bdb_res.h 100644 1.15kB
bdb_uri.c 100644 3.83kB
bdb_uri.h 100644 1.88kB
km_bdb_lib.c 100644 26.47kB
km_bdb_lib.h 100644 3.84kB
km_bdb_mi.c 100644 1.74kB
km_bdb_mi.h 100644 1.14kB
km_bdb_res.c 100644 14.97kB
km_bdb_res.h 100644 2.04kB
km_bdb_util.c 100644 1.42kB
km_bdb_util.h 100644 1.16kB
km_bdb_val.c 100644 6.11kB
km_bdb_val.h 100644 1.33kB
km_db_berkeley.c 100644 25.55kB
km_db_berkeley.h 100644 2.51kB
README
Berkeley DB Module Will Quan Cisco Systems Edited by Will Quan Copyright © 2007 Cisco Systems __________________________________________________________________ Table of Contents 1. Admin Guide 1. Overview 2. Dependencies 2.1. Kamailio Modules 2.2. External Libraries or Applications 3. Exported Parameters 3.1. auto_reload (integer) 3.2. log_enable (integer) 3.3. journal_roll_interval (integer seconds) 4. Exported Functions 5. Exported MI Functions 5.1. bdb_reload 6. Installation and Running 7. Database Schema and Metadata 8. METADATA_COLUMNS (required) 9. METADATA_KEYS (required) 10. METADATA_READONLY (optional) 11. METADATA_LOGFLAGS (optional) 12. DB Maintaince Script : kamdbctl 13. DB Recovery : kambdb_recover 14. Known Limitations List of Examples 1.1. Set auto_reload parameter 1.2. Set log_enable parameter 1.3. Set journal_roll_interval parameter 1.4. METADATA_COLUMNS 1.5. contents of version table 1.6. METADATA_COLUMNS 1.7. METADATA_KEYS 1.8. METADATA_LOGFLAGS 1.9. kamdbctl 1.10. kambdb_recover usage Chapter 1. Admin Guide Table of Contents 1. Overview 2. Dependencies 2.1. Kamailio Modules 2.2. External Libraries or Applications 3. Exported Parameters 3.1. auto_reload (integer) 3.2. log_enable (integer) 3.3. journal_roll_interval (integer seconds) 4. Exported Functions 5. Exported MI Functions 5.1. bdb_reload 6. Installation and Running 7. Database Schema and Metadata 8. METADATA_COLUMNS (required) 9. METADATA_KEYS (required) 10. METADATA_READONLY (optional) 11. METADATA_LOGFLAGS (optional) 12. DB Maintaince Script : kamdbctl 13. DB Recovery : kambdb_recover 14. Known Limitations 1. Overview This is a module which integrates the Berkeley DB into SIP-router. It implements the DB API defined in SIP-router. 2. Dependencies 2.1. Kamailio Modules 2.2. External Libraries or Applications 2.1. Kamailio Modules The following modules must be loaded before this module: * No dependencies on other Kamailio modules. 2.2. External Libraries or Applications The following libraries or applications must be installed before running Kamailio with this module loaded: * Berkeley Berkeley DB - an embedded database. Version >= 4.6. 3. Exported Parameters 3.1. auto_reload (integer) 3.2. log_enable (integer) 3.3. journal_roll_interval (integer seconds) 3.1. auto_reload (integer) The auto-reload will close and reopen a Berkeley DB when the files inode has changed. The operation occurs only duing a query. Other operations such as insert or delete, do not invoke auto_reload. Default value is 0 (1 - on / 0 - off). Example 1.1. Set auto_reload parameter ... modparam("db_berkeley", "auto_reload", 1) ... 3.2. log_enable (integer) The log_enable boolean controls when to create journal files. The following operations can be journaled: INSERT, UPDATE, DELETE. Other operations such as SELECT, do not. This journaling are required if you need to recover from a corrupt DB file. That is, kambdb_recover requires these to rebuild the db file. If you find this log feature useful, you may also be interested in the METADATA_LOGFLAGS bitfield that each table has. It will allow you to control which operations to journal, and the destination (like syslog, stdout, local-file). Refer to bdblib_log() and documentation on METADATA. Default value is 0 (1 - on / 0 - off). Example 1.2. Set log_enable parameter ... modparam("db_berkeley", "log_enable", 1) ... 3.3. journal_roll_interval (integer seconds) The journal_roll_interval will close and open a new log file. The roll operation occurs only at the end of writing a log, so it is not guaranteed to to roll 'on time'. Default value is 0 (off). Example 1.3. Set journal_roll_interval parameter ... modparam("db_berkeley", "journal_roll_interval", 3600) ... 4. Exported Functions No function exported to be used from configuration file. 5. Exported MI Functions 5.1. bdb_reload 5.1. bdb_reload Causes db_berkeley module to re-read the contents of specified table (or dbenv). The db_berkeley DB actually loads each table on demand, as opposed to loading all at mod_init time. The bdb_reload operation is implemented as a close followed by a reopen. Note- bdb_reload will fail if a table has not been accessed before (because the close will fail). Name: bdb_reload Parameters: tablename (or db_path); to reload a particular table provide the tablename as the arguement (eg subscriber); to reload all tables provide the db_path to the db files. The path can be found in kamctlrc DB_PATH variable. 6. Installation and Running First download, compile and install the Berkeley DB. This is outside the scope of this document. Documentation for this procedure is available on the Internet. Next, prepare to compile SIP-router with the db_berkeley module. In the directory /modules/db_berkeley, modify the Makefile to point to your distribution of Berkeley DB. You may also define 'BDB_EXTRA_DEBUG' to compile in extra debug logs. However, it is not a recommended deployment to production servers. Because the module dependes on an external library, the db_berkeley module is not compiled and installed by default. You can use one of the next options. * edit the "Makefile" and remove "db_berkeley" from "excluded_modules" list. Then follow the standard procedure to install Kamailio: "make all; make install". * from command line use: 'make all include_modules="db_berkeley"; make install include_modules="db_berkeley"'. Installation of SIP-router is performed by simply running make install as root user of the main directory. This will install the binaries in /usr/local/sbin/. If this was successful, SIP-router control engine files should now be installed as /usr/local/sbin/kamdbctl. Decide where (on the filesystem) you want to install the Berkeley DB files. For instance, '/usr/local/etc/kamailio/db_berkeley' directory. Make note of this directory as we need to add this path to the kamctlrc file. Note: SIP-router will not startup without these DB files. Edit kamctlrc - There are two parameters in this file that should be configured before kamdbctl script can work properly: DBENGINE and DB_PATH. Edit file: '/usr/local/etc/sip-router/kamctlrc' ## database type: MYSQL, PGSQL, DB_BERKELEY, or DBTEXT, by defau lt none is loaded # DBENGINE=DB_BERKELEY ## database path used by dbtext or db_berkeley # DB_PATH="/usr/local/etc/kamailio/db_berkeley" (Optional) Pre creation step- Customize your meta-data. The DB files are initially seeded with necessary meta-data. This is a good time to review the meta-data section details, before making modifications to your tables dbschema. By default, the files are installed in '/usr/local/share/sip-router/db_berkeley/sip-router' By default these tables are created Read/Write and without any journalling as shown. These settings can be modified on a per table basis. Note: If you plan to use kambdb_recover, you must change the LOGFLAGS. METADATA_READONLY 0 METADATA_LOGFLAGS 0 Execute kamdbctl - There are three (3) groups of tables you may need depending on your situation. kamdbctl create (required) kamdbctl presence (optional) kamdbctl extra (optional) Modify the SIP-router configuration file to use db_berkeley module. The database URL for modules must be the path to the directory where the Berkeley DB table-files are located, prefixed by "berkeley://", e.g., "berkeley:///usr/local/etc/kamailio/db_berkeley". A couple other IMPORTANT things to consider are the 'db_mode' and the 'use_domain' modparams. The description of these parameters are found in usrloc documentation. Note on db_mode- The db_berkeley module will only journal the moment usrloc writes back to the DB. The safest mode is mode 3 , since the db_berkeley journal files will always be up-to-date. The main point is the db_mode vs. recovery by journal file interaction. Writing journal entries is 'best effort'. So if the hard drive becomes full, the attempt to write a journal entry may fail. Note on use_domain- The db_berkeley module will attempt natural joins when performing a query. This is basically a lexigraphical string compare using the keys provided. In most places in the db_berkeley dbschema (unless you customize), the domainname is identified as a natural key. Consider an example where use_domain = 0. In table subscriber, the db will be keying on 'username|NULL' because the default value will be used when that key column is not provided. This effectivly means that later queries must consistently use the username (w.o domain) in order to find a result to that particular subscriber query. The main point is 'use_domain' can not be changed once the db_berkeley is setup. 7. Database Schema and Metadata All Berkeley DB tables are created via the kamdbctl script. This section provides details as to the content and format of the DB file upon creation. Since the Berkeley DB stores key value pairs, the database is seeded with a few meta-data rows . The keys to these rows must begin with 'METADATA'. Here is an example of table meta-data, taken from the table 'version'. Note on reserved character- The '|' pipe character is used as a record delimiter within the Berkeley DB implementation and must not be present in any DB field. Example 1.4. METADATA_COLUMNS METADATA_COLUMNS table_name(str) table_version(int) METADATA_KEY 0 In the above example, the row METADATA_COLUMNS defines the column names and type, and the row METADATA_KEY defines which column(s) form the key. Here the value of 0 indicates that column 0 is the key(ie table_name). With respect to column types, the db_berkeley modules only has the following types: string, str, int, double, and datetime. The default type is string, and is used when one of the others is not specified. The columns of the meta-data are delimited by whitespace. The actual column data is stored as a string value, and delimited by the '|' pipe character. Since the code tokenizes on this delimiter, it is important that this character not appear in any valid data field. The following is the output of the 'db_berkeley.sh dump version' command. It shows contents of table 'version' in plain text. Example 1.5. contents of version table VERSION=3 format=print type=hash h_nelem=21 db_pagesize=4096 HEADER=END METADATA_READONLY 1 address| address|3 aliases| aliases|1004 dbaliases| dbaliases|1 domain| domain|1 gw_grp| gw_grp|1 gw| gw|4 speed_dial| speed_dial|2 subscriber| subscriber|6 uri| uri|1 METADATA_COLUMNS table_name(str) table_version(int) METADATA_KEY 0 acc| acc|4 grp| grp|2 lcr| lcr|2 location| location|1004 missed_calls| missed_calls|3 re_grp| re_grp|1 silo| silo|5 trusted| trusted|4 usr_preferences| usr_preferences|2 DATA=END 8. METADATA_COLUMNS (required) The METADATA_COLUMNS row contains the column names and types. Each is space delimited. Here is an example of the data taken from table subscriber : Example 1.6. METADATA_COLUMNS METADATA_COLUMNS username(str) domain(str) password(str) ha1(str) ha1b(str) first_name(str) last_ name(str) email_address(str) datetime_created(datetime) timezone(str) rpid(str) Related (hardcoded) limitations: * maximum of 32 columns per table. * maximum tablename size is 64. * maximum data length is 2048 Currently supporting these five types: str, datetime, int, double, string. 9. METADATA_KEYS (required) The METADATA_KEYS row indicates the indexes of the key columns, with respect to the order specified in METADATA_COLUMNS. Here is an example taken from table subscriber that brings up a good point: Example 1.7. METADATA_KEYS METADATA_KEY 0 1 The point is that both the username and domain name are require as the key to this record. Thus, usrloc modparam use_domain = 1 must be set for this to work. 10. METADATA_READONLY (optional) The METADATA_READONLY row contains a boolean 0 or 1. By default, its value is 0. On startup the DB will open initially as read-write (loads metadata) and then if this is set=1, it will close and reopen as read only (ro). I found this useful because readonly has impacts on the internal db locking etc. 11. METADATA_LOGFLAGS (optional) The METADATA_LOGFLAGS row contains a bitfield that customizes the journaling on a per table basis. If not present the default value is taken as 0. Here are the masks so far (taken from bdb_lib.h): Example 1.8. METADATA_LOGFLAGS #define JLOG_NONE 0 #define JLOG_INSERT 1 #define JLOG_DELETE 2 #define JLOG_UPDATE 4 #define JLOG_STDOUT 8 #define JLOG_SYSLOG 16 This means that if you want to journal INSERTS to local file and syslog the value should be set to 1+16=17. Or if you do not want to journal at all, set this to 0. 12. DB Maintaince Script : kamdbctl Use the kamdbctl script for maintaining SIP-router Berkeley DB tables. This script assumes you have DBENGINE and DB_PATH setup correctly in kamctlrc. Note Unsupported commands are- backup, restore, migrate, copy, serweb. Example 1.9. kamdbctl usage: kamdbctl create kamdbctl presence kamdbctl extra kamdbctl drop kamdbctl reinit kamdbctl bdb list (lists the underlying db files in DB_PATH) kamdbctl bdb cat db (prints the contents of db file to STDOUT in pl ain-text) kamdbctl bdb swap db (installs db.new by db -> db.old; db.new -> db) kamdbctl bdb append db datafile (appends data to a new instance of db; output DB_PATH/db.new) kamdbctl bdb newappend db datafile (appends data to a new instance of db; output DB_PATH/db.new) 13. DB Recovery : kambdb_recover The db_berkeley module uses the Concurrent Data Store (CDS) architecture. As such, no transaction or journaling is provided by the DB natively. The application kambdb_recover is specifically written to recover data from journal files that SIP-router creates. The kambdb_recover application requires an additional text file that contains the table schema. The schema is loaded with the '-s' option and is required for all operations. Provide the path to the db_berkeley plain-text schema files. By default, these install to '/usr/local/share/kamailio/db_berkeley/kamailio/'. The '-h' home option is the DB_PATH path. Unlike the Berkeley utilities, this application does not look for the DB_PATH environment variable, so you have to specify it. If not specified, it will assume the current working directory. The last argument is the operation. There are fundamentally only two operations- create and recover. The following illustrates the four operations available to the administrator. Example 1.10. kambdb_recover usage usage: ./kambdb_recover -s schemadir [-h home] [-c tablename] This will create a brand new DB file with metadata. usage: ./kambdb_recover -s schemadir [-h home] [-C all] This will create all the core tables, each with metadata. usage: ./kambdb_recover -s schemadir [-h home] [-r journal-file] This will rebuild a DB and populate it with operation from journal-file. The table name is embedded in the journal-file name by convention. usage: ./kambdb_recover -s schemadir [-h home] [-R lastN] This will iterate over all core tables enumerated. If journal files exis t in 'home', a new DB file will be created and populated with the data found in the l ast N files. The files are 'replayed' in chronological order (oldest to newest). This allows the administrator to rebuild the db with a subset of all possible operations if needed. For example, you may only be interested in the last hours data in table location. Important note- A corrupted DB file must be moved out of the way before kambdb_recover is executed. 14. Known Limitations The Berkeley DB does not nativly support an autoincrement (or sequence) mechanism. Consequently, this version does not support surragate keys in dbschema. These are the id columns in the tables.