#!KAMAILIO
#
# Simple/sample kamailio.cfg for running a proxy/registrar with TLS and
# WebSockets support.

#!substdef "!DBURL!sqlite:///etc/kamailio/db.sqlite!g"
#!substdef "!MY_IP_ADDR!a.b.c.d!g"
#!substdef "!MY_DOMAIN!example.com!g"
#!substdef "!MY_WS_PORT!80!g"
#!substdef "!MY_WSS_PORT!443!g"
#!substdef "!MY_MSRP_PORT!9000!g"
#!substdef "!MY_WS_ADDR!tcp:MY_IP_ADDR:MY_WS_PORT!g"
#!substdef "!MY_WSS_ADDR!tls:MY_IP_ADDR:MY_WSS_PORT!g"
#!substdef "!MY_MSRP_ADDR!tls:MY_IP_ADDR:MY_MSRP_PORT!g"
#!substdef "!MSRP_MIN_EXPIRES!1800!g"
#!substdef "!MSRP_MAX_EXPIRES!3600!g"

##!define LOCAL_TEST_RUN
#!define WITH_TLS
#!define WITH_WEBSOCKETS
#!define WITH_MSRP


####### Global Parameters #########

fork=yes
children=4

#!ifdef WITH_TLS
enable_tls=1
#!endif

listen=MY_IP_ADDR
#!ifdef WITH_WEBSOCKETS
listen=MY_WS_ADDR
#!ifdef WITH_TLS
listen=MY_WSS_ADDR
#!endif
#!endif
#!ifdef WITH_MSRP
listen=MY_MSRP_ADDR
#!endif

tcp_connection_lifetime=3604
tcp_accept_no_cl=yes
tcp_rd_buf_size=16384

#!ifdef LOCAL_TEST_RUN
debug=2
mpath="modules"
#!else
debug=0
mpath="/usr/lib64/kamailio/modules/"
#!endif

loadmodule "db_sqlite.so"
loadmodule "tm.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "auth.so"
loadmodule "auth_db.so"
loadmodule "kex.so"
loadmodule "mi_rpc.so"
loadmodule "corex.so"
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
#!ifdef WITH_MSRP
loadmodule "msrp.so"
loadmodule "htable.so"
loadmodule "cfgutils.so"
#!endif
#!ifdef WITH_WEBSOCKETS
loadmodule "xhttp.so"
loadmodule "websocket.so"
loadmodule "nathelper.so"
#!endif

# ----------------- setting module-specific parameters ---------------

# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)

# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)

# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
modparam("registrar", "max_expires", 3600)
modparam("registrar", "gruu_enabled", 0)

# ----- usrloc params -----
modparam("usrloc", "db_url", "DBURL")
modparam("usrloc", "db_mode", 0)

# ----- auth params -----
modparam("auth", "nonce_count", 1)
modparam("auth", "qop", "auth")

# ----- auth_db params -----
modparam("auth_db", "db_url", "DBURL")
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "id")

# ----- corex params -----
modparam("corex", "alias_subdomains", "MY_DOMAIN")

#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "tls_method", "SSLv23")
modparam("tls", "certificate", "/etc/pki/CA/ser1_cert.pem")
modparam("tls", "private_key", "/etc/pki/CA/privkey.pem")
modparam("tls", "ca_list", "/etc/pki/CA/calist.pem")
#!endif

#!ifdef WITH_WEBSOCKETS
# ----- nathelper params -----
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
# Note: leaving NAT pings turned off here as nathelper is _only_ being used for
#       WebSocket connections.  NAT pings are not needed as WebSockets have
#       their own keep-alives.
#!endif

#!ifdef WITH_MSRP
# ----- htable params -----
modparam("htable", "htable", "msrp=>size=8;autoexpire=MSRP_MAX_EXPIRES;")
#!endif


####### Routing Logic ########

# Main SIP request routing logic
# - processing of any incoming SIP request starts with this route
# - note: this is the same as route { ... }
request_route {
	if ((($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT)
		&& !(proto == WS || proto == WSS)) || $Rp == MY_MSRP_PORT) {
		xlog("L_WARN", "SIP request received on $Rp\n");
		sl_send_reply("403", "Forbidden");
		exit;
	}

	# per request initial checks
	route(REQINIT);

#!ifdef WITH_WEBSOCKETS
	if (nat_uac_test(64)) {
		# Do NAT traversal stuff for requests from a WebSocket
		# connection - even if it is not behind a NAT!
		# This won't be needed in the future if Kamailio and the
		# WebSocket client support Outbound and Path.
		force_rport();
		if (is_method("REGISTER")) {
			fix_nated_register();
		} else {
			if (!add_contact_alias()) {
				xlog("L_ERR", "Error aliasing contact <$ct>\n");
				sl_send_reply("400", "Bad Request");
				exit;
			}
		}
	}
#!endif

	# handle requests within SIP dialogs
	route(WITHINDLG);

	### only initial requests (no To tag)

	# CANCEL processing
	if (is_method("CANCEL")) {
		if (t_check_trans()) {
			t_relay();
		}
		exit;
	}

	t_check_trans();

	# authentication
	route(AUTH);

	# record routing for dialog forming requests (in case they are routed)
	# - remove preloaded route headers
	remove_hf("Route");
	if (is_method("INVITE")) {
		record_route();
	}

	# handle registrations
	route(REGISTRAR);

	if ($rU==$null) {
		# request with no Username in RURI
		sl_send_reply("484", "Address Incomplete");
		exit;
	}

	# user location service
	route(LOCATION);

	route(RELAY);
}

route[RELAY] {
	if (!t_relay()) {
		sl_reply_error();
	}
	exit;
}

# Per SIP request initial checks
route[REQINIT] {
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483", "Too Many Hops");
		exit;
	}

	if (!sanity_check("1511", "7")) {
		xlog("Malformed SIP message from $si:$sp\n");
		exit;
	}

	if (uri == myself && is_method("OPTIONS") && !(uri=~"sip:.*[@]+.*")) {
		options_reply();
		exit;
	}
}

# Handle requests within SIP dialogs
route[WITHINDLG] {
	if (has_totag()) {
		# sequential request withing a dialog should
		# take the path determined by record-routing
		if (loose_route()) {
#!ifdef WITH_WEBSOCKETS
			if ($du == "") {
				if (!handle_ruri_alias()) {
					xlog("L_ERR", "Bad alias <$ru>\n");
					sl_send_reply("400", "Bad Request");
					exit;
				}
			}
#!endif
			route(RELAY);
		} else {
			if ( is_method("ACK") ) {
				if ( t_check_trans() ) {
					# no loose-route, but stateful ACK;
					# must be an ACK after a 487
					# or e.g. 404 from upstream server
					t_relay();
					exit;
				} else {
					# ACK without matching transaction...
					# ignore and discard
					exit;
				}
			}
			sl_send_reply("404", "Not Found");
		}
		exit;
	}
}

# Handle SIP registrations
route[REGISTRAR] {
	if (is_method("REGISTER")) {
		if (!save("location")) {
			sl_reply_error();
		}
		exit;
	}
}

# USER location service
route[LOCATION] {
	if (!is_subscriber("$ru", "subscriber", "1")) {
		t_newtran();
		send_reply("404", "Not Found");
		exit;
	}

	if (!lookup("location")) {
		$var(rc) = $rc;
		t_newtran();
		switch ($var(rc)) {
		case -1:
			send_reply("480", "Temporarily Unavailable");
			exit;
		case -2:
			send_reply("405", "Method Not Allowed");
			exit;
		case -3:
			send_reply("500", "Server Internal Error");
			exit;
		}
	}
}

# Authentication route
route[AUTH] {
	if (is_method("REGISTER") || from_uri==myself) {
		# authenticate requests
		if (!auth_check("$fd", "subscriber", "1")) {
			auth_challenge("$fd", "0");
			exit;
		}
		# user authenticated - remove auth header
		if(!is_method("REGISTER")) {
			consume_credentials();
		}
	}
	# if caller is not local subscriber, then check if it calls
	# a local destination, otherwise deny, not an open relay here
	if (from_uri!=myself && uri!=myself) {
		sl_send_reply("403", "Forbidden");
		exit;
	}
}

#!ifdef WITH_WEBSOCKETS
onreply_route {
	if ((($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT)
		&& !(proto == WS || proto == WSS)) || $Rp == MY_MSRP_PORT) {
		xlog("L_WARN", "SIP response received on $Rp\n");
		drop;
	}

	if (nat_uac_test(64)) {
		# Do NAT traversal stuff for replies to a WebSocket connection
		# - even if it is not behind a NAT!
		# This won't be needed in the future if Kamailio and the
		# WebSocket client support Outbound and Path.
		add_contact_alias();
	}
}

event_route[xhttp:request] {
	set_reply_close();
	set_reply_no_connect();
	
	if ($Rp != MY_WS_PORT
#!ifdef WITH_TLS
	    && $Rp != MY_WSS_PORT
#!endif
	) {
		xlog("L_WARN", "HTTP request received on $Rp\n");
		xhttp_reply("403", "Forbidden", "", "");
		exit;
	}

	xlog("L_DBG", "HTTP Request Received\n");

	if ($hdr(Upgrade)=~"websocket"
			&& $hdr(Connection)=~"Upgrade"
			&& $rm=~"GET") {

		# Validate Host - make sure the client is using the correct
		# alias for WebSockets
		if ($hdr(Host) == $null || !is_myself("sip:" + $hdr(Host))) {
			xlog("L_WARN", "Bad host $hdr(Host)\n");
			xhttp_reply("403", "Forbidden", "", "");
			exit;
		}

		# Optional... validate Origin - make sure the client is from an
		# authorised website.  For example,
		#
		# if ($hdr(Origin) != "http://communicator.MY_DOMAIN"
		#     && $hdr(Origin) != "https://communicator.MY_DOMAIN") {
		#	xlog("L_WARN", "Unauthorised client $hdr(Origin)\n");
		#	xhttp_reply("403", "Forbidden", "", "");
		#	exit;
		# }

		# Optional... perform HTTP authentication

		# ws_handle_handshake() exits (no further configuration file
		# processing of the request) when complete.
		if (ws_handle_handshake())
		{
			# Optional... cache some information about the
			# successful connection
			exit;
		}
	}

	xhttp_reply("404", "Not Found", "", "");
}

event_route[websocket:closed] {
	xlog("L_INFO", "WebSocket connection from $si:$sp has closed\n");
}
#!endif

#!ifdef WITH_MSRP
event_route[msrp:frame-in] {
	msrp_reply_flags("1");

	if ((($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT)
		&& !(proto == WS || proto == WSS)) && $Rp != MY_MSRP_PORT) {
		xlog("L_WARN", "MSRP request received on $Rp\n");
		msrp_reply("403", "Action-not-allowed");
		exit;
	}

	if (msrp_is_reply()) {
		msrp_relay();
	} else if($msrp(method)=="AUTH") {
		if($msrp(nexthops)>0) {
			msrp_relay();
			exit;
		}

		if (!www_authenticate("MY_DOMAIN", "subscriber",
					"$msrp(method)")) {
			if (auth_get_www_authenticate("MY_DOMAIN", "1",
							"$var(wauth)")) {
				msrp_reply("401", "Unauthorized",
							"$var(wauth)");
			} else {
				msrp_reply("500", "Server Error");
			}
			exit;
		}

		if ($hdr(Expires) != $null) {
			$var(expires) = (int) $hdr(Expires);
			if ($var(expires) < MSRP_MIN_EXPIRES) {
				msrp_reply("423", "Interval Out-of-Bounds",
					"Min-Expires: MSRP_MIN_EXPIRES\r\n");
				exit;
			} else if ($var(expires) > MSRP_MAX_EXPIRES) {
				msrp_reply("423", "Interval Out-of-Bounds",
					"Max-Expires: MSRP_MAX_EXPIRES\r\n");
				exit;
			}
		} else {
			$var(expires) = MSRP_MAX_EXPIRES;
		}

		$var(cnt) = $var(cnt) + 1;
		pv_printf("$var(sessid)", "s.$(pp).$(var(cnt)).$(RANDOM)");
		$sht(msrp=>$var(sessid)::srcaddr) = $msrp(srcaddr);
		$sht(msrp=>$var(sessid)::srcsock) = $msrp(srcsock);
		$shtex(msrp=>$var(sessid)) = $var(expires) + 5;
		# - Use-Path: the MSRP address for server + session id
		$var(hdrs) = "Use-Path: msrps://MY_IP_ADDR:MY_MSRP_PORT/"
					+ $var(sessid) + ";tcp\r\n"
					+ "Expires: " + $var(expires) + "\r\n";
		msrp_reply("200", "OK", "$var(hdrs)");
	} else if ($msrp(method)=="SEND" || $msrp(method)=="REPORT") {
		if ($msrp(nexthops)>1) {
			if ($msrp(method)!="REPORT") {
				msrp_reply("200", "OK");
			}
			msrp_relay();
			exit;
		}
		$var(sessid) = $msrp(sessid);
		if ($sht(msrp=>$var(sessid)::srcaddr) == $null) {
			# one more hop, but we don't have address in htable
			msrp_reply("481", "Session-does-not-exist");
			exit;
		} else if ($msrp(method)!="REPORT") {
			msrp_reply("200", "OK");
		}
		msrp_relay_flags("1");
		msrp_set_dst("$sht(msrp=>$var(sessid)::srcaddr)",
				"$sht(msrp=>$var(sessid)::srcsock)");
		msrp_relay();
	} else {
		msrp_reply("501", "Request-method-not-understood");
	}
}
#!endif