doc/doxygen/ser.doxygen
1f1462e8
 # Doxyfile 1.5.3
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project
 #
 # All text after a hash (#) is considered a comment and will be ignored
 # The format is:
 #       TAG = value [value, ...]
 # For lists items can also be appended using:
 #       TAG += value [value, ...]
 # Values that contain spaces should be placed between quotes (" ")
 
d30dd7c2
 #---------------------------------------------------------------------------
 # Project related configuration options
 #---------------------------------------------------------------------------
1f1462e8
 
 # This tag specifies the encoding used for all characters in the config file that 
 # follow. The default is UTF-8 which is also the encoding used for all text before 
 # the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into 
 # libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of 
 # possible encodings.
 
 DOXYFILE_ENCODING      = UTF-8
 
 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
 # by quotes) that should identify the project.
 
5a03489e
 # --- Set by the SIP-router makefile
1f1462e8
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number. 
 # This could be handy for archiving the generated documentation or 
 # if some version control system is used.
 
5a03489e
 # --- Set by the SIP-router makefile
1f1462e8
 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
 # base path where the generated documentation will be put. 
 # If a relative path is entered, it will be relative to the location 
 # where doxygen was started. If left blank the current directory will be used.
 
 OUTPUT_DIRECTORY       = doc/doxygen/
 
 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
 # 4096 sub-directories (in 2 levels) under the output directory of each output 
 # format and will distribute the generated files over these directories. 
 # Enabling this option can be useful when feeding doxygen a huge amount of 
 # source files, where putting all generated files in the same directory would 
 # otherwise cause performance problems for the file system.
 
 CREATE_SUBDIRS         = NO
 
 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
 # documentation generated by doxygen is written. Doxygen will use this 
 # information to generate all constant output in the proper language. 
 # The default language is English, other supported languages are: 
 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, 
 # Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, 
 # Italian, Japanese, Japanese-en (Japanese with English messages), Korean, 
 # Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, 
 # Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
 
d30dd7c2
 OUTPUT_LANGUAGE        = English
1f1462e8
 
 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
 # include brief member descriptions after the members that are listed in 
 # the file and class documentation (similar to JavaDoc). 
 # Set to NO to disable this.
 
d30dd7c2
 BRIEF_MEMBER_DESC      = YES
1f1462e8
 
 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
 # the brief description of a member or function before the detailed description. 
 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
 # brief descriptions will be completely suppressed.
 
 REPEAT_BRIEF           = NO
 
 # This tag implements a quasi-intelligent brief description abbreviator 
 # that is used to form the text in various listings. Each string 
 # in this list, if found as the leading text of the brief description, will be 
 # stripped from the text and the result after processing the whole list, is 
 # used as the annotated text. Otherwise, the brief description is used as-is. 
 # If left blank, the following values are used ("$name" is automatically 
 # replaced with the name of the entity): "The $name class" "The $name widget" 
 # "The $name file" "is" "provides" "specifies" "contains" 
 # "represents" "a" "an" "the"
 
 ABBREVIATE_BRIEF       = "The $name class " \
                          "The $name widget " \
                          "The $name file " \
d30dd7c2
                          is \
                          provides \
                          specifies \
                          contains \
                          represents \
                          a \
                          an \
                          the
1f1462e8
 
 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
 # Doxygen will generate a detailed section even if there is only a brief 
 # description.
 
d30dd7c2
 ALWAYS_DETAILED_SEC    = NO
1f1462e8
 
 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all 
 # inherited members of a class in the documentation of that class as if those 
 # members were ordinary class members. Constructors, destructors and assignment 
 # operators of the base classes will not be shown.
 
d30dd7c2
 INLINE_INHERITED_MEMB  = NO
1f1462e8
 
 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
 # path before files name in the file list and in the header files. If set 
 # to NO the shortest path that makes the file name unique will be used.
 
d30dd7c2
 FULL_PATH_NAMES        = NO
1f1462e8
 
 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
 # can be used to strip a user-defined part of the path. Stripping is 
 # only done if one of the specified strings matches the left-hand part of 
 # the path. The tag can be used to show relative paths in the file list. 
 # If left blank the directory from which doxygen is run is used as the 
 # path to strip.
 
d30dd7c2
 STRIP_FROM_PATH        = 
1f1462e8
 
 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
 # the path mentioned in the documentation of a class, which tells 
 # the reader which header file to include in order to use a class. 
 # If left blank only the name of the header file containing the class 
 # definition is used. Otherwise one should specify the include paths that 
 # are normally passed to the compiler using the -I flag.
 
d30dd7c2
 STRIP_FROM_INC_PATH    = 
1f1462e8
 
 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
 # (but less readable) file names. This can be useful is your file systems 
 # doesn't support long names like on DOS, Mac, or CD-ROM.
 
d30dd7c2
 SHORT_NAMES            = NO
1f1462e8
 
 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
 # will interpret the first line (until the first dot) of a JavaDoc-style 
 # comment as the brief description. If set to NO, the JavaDoc 
 # comments will behave just like regular Qt-style comments 
 # (thus requiring an explicit @brief command for a brief description.)
 
dc5083a6
 JAVADOC_AUTOBRIEF      = YES
1f1462e8
 
 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will 
 # interpret the first line (until the first dot) of a Qt-style 
 # comment as the brief description. If set to NO, the comments 
 # will behave just like regular Qt-style comments (thus requiring 
 # an explicit \brief command for a brief description.)
 
dc5083a6
 QT_AUTOBRIEF           = YES
1f1462e8
 
 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
 # treat a multi-line C++ special comment block (i.e. a block of //! or /// 
 # comments) as a brief description. This used to be the default behaviour. 
 # The new default is to treat a multi-line C++ comment block as a detailed 
 # description. Set this tag to YES if you prefer the old behaviour instead.
 
d30dd7c2
 MULTILINE_CPP_IS_BRIEF = NO
1f1462e8
 
 # If the DETAILS_AT_TOP tag is set to YES then Doxygen 
 # will output the detailed description near the top, like JavaDoc.
 # If set to NO, the detailed description appears after the member 
 # documentation.
 
a126d8df
 DETAILS_AT_TOP         = YES
1f1462e8
 
 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
 # member inherits the documentation from any documented member that it 
 # re-implements.
 
d30dd7c2
 INHERIT_DOCS           = YES
1f1462e8
 
 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce 
 # a new page for each member. If set to NO, the documentation of a member will 
 # be part of the file/class/namespace that contains it.
 
d30dd7c2
 SEPARATE_MEMBER_PAGES  = NO
1f1462e8
 
 # The TAB_SIZE tag can be used to set the number of spaces in a tab. 
 # Doxygen uses this value to replace tabs by spaces in code fragments.
 
d30dd7c2
 TAB_SIZE               = 8
1f1462e8
 
 # This tag can be used to specify a number of aliases that acts 
 # as commands in the documentation. An alias has the form "name=value". 
 # For example adding "sideeffect=\par Side Effects:\n" will allow you to 
 # put the command \sideeffect (or @sideeffect) in the documentation, which 
 # will result in a user-defined paragraph with heading "Side Effects:". 
 # You can put \n's in the value part of an alias to insert newlines.
 
d30dd7c2
 ALIASES                = 
1f1462e8
 
 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C 
 # sources only. Doxygen will then generate output that is more tailored for C. 
 # For instance, some of the names that are used will be different. The list 
 # of all members will be omitted, etc.
 
d30dd7c2
 OPTIMIZE_OUTPUT_FOR_C  = YES
1f1462e8
 
 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java 
 # sources only. Doxygen will then generate output that is more tailored for Java. 
 # For instance, namespaces will be presented as packages, qualified scopes 
 # will look different, etc.
 
d30dd7c2
 OPTIMIZE_OUTPUT_JAVA   = NO
1f1462e8
 
 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to 
 # include (a tag file for) the STL sources as input, then you should 
 # set this tag to YES in order to let doxygen match functions declarations and 
 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. 
 # func(std::string) {}). This also make the inheritance and collaboration 
 # diagrams that involve STL classes more complete and accurate.
 
d30dd7c2
 BUILTIN_STL_SUPPORT    = NO
1f1462e8
 
 # If you use Microsoft's C++/CLI language, you should set this option to YES to
 # enable parsing support.
 
 CPP_CLI_SUPPORT        = NO
 
 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
 # tag is set to YES, then doxygen will reuse the documentation of the first 
 # member in the group (if any) for the other members of the group. By default 
 # all members of a group must be documented explicitly.
 
d30dd7c2
 DISTRIBUTE_GROUP_DOC   = NO
1f1462e8
 
 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
 # the same type (for instance a group of public functions) to be put as a 
 # subgroup of that type (e.g. under the Public Functions section). Set it to 
 # NO to prevent subgrouping. Alternatively, this can be done per class using 
 # the \nosubgrouping command.
 
d30dd7c2
 SUBGROUPING            = YES
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
 # documentation are documented, even if no documentation was available. 
 # Private class members and static file members will be hidden unless 
 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
 
d30dd7c2
 EXTRACT_ALL            = NO
1f1462e8
 
 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
 # will be included in the documentation.
 
d30dd7c2
 EXTRACT_PRIVATE        = NO
1f1462e8
 
 # If the EXTRACT_STATIC tag is set to YES all static members of a file 
 # will be included in the documentation.
 
 EXTRACT_STATIC         = YES
 
 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
 # defined locally in source files will be included in the documentation. 
 # If set to NO only classes defined in header files are included.
 
d30dd7c2
 EXTRACT_LOCAL_CLASSES  = YES
1f1462e8
 
 # This flag is only useful for Objective-C code. When set to YES local 
 # methods, which are defined in the implementation section but not in 
 # the interface are included in the documentation. 
 # If set to NO (the default) only methods in the interface are included.
 
d30dd7c2
 EXTRACT_LOCAL_METHODS  = NO
1f1462e8
 
 # If this flag is set to YES, the members of anonymous namespaces will be extracted 
 # and appear in the documentation as a namespace called 'anonymous_namespace{file}', 
 # where file will be replaced with the base name of the file that contains the anonymous 
 # namespace. By default anonymous namespace are hidden.
 
 EXTRACT_ANON_NSPACES   = NO
 
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
 # undocumented members of documented classes, files or namespaces. 
 # If set to NO (the default) these members will be included in the 
 # various overviews, but no documentation section is generated. 
 # This option has no effect if EXTRACT_ALL is enabled.
 
d30dd7c2
 HIDE_UNDOC_MEMBERS     = YES
1f1462e8
 
 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
 # undocumented classes that are normally visible in the class hierarchy. 
 # If set to NO (the default) these classes will be included in the various 
 # overviews. This option has no effect if EXTRACT_ALL is enabled.
 
d30dd7c2
 HIDE_UNDOC_CLASSES     = YES
1f1462e8
 
 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
 # friend (class|struct|union) declarations. 
 # If set to NO (the default) these declarations will be included in the 
 # documentation.
 
d30dd7c2
 HIDE_FRIEND_COMPOUNDS  = NO
1f1462e8
 
 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
 # documentation blocks found inside the body of a function. 
 # If set to NO (the default) these blocks will be appended to the 
 # function's detailed documentation block.
 
d30dd7c2
 HIDE_IN_BODY_DOCS      = NO
1f1462e8
 
 # The INTERNAL_DOCS tag determines if documentation 
 # that is typed after a \internal command is included. If the tag is set 
 # to NO (the default) then the documentation will be excluded. 
 # Set it to YES to include the internal documentation.
 
d30dd7c2
 INTERNAL_DOCS          = NO
1f1462e8
 
 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
 # file names in lower-case letters. If set to YES upper-case letters are also 
 # allowed. This is useful if you have classes or files whose names only differ 
 # in case and if your file system supports case sensitive file names. Windows 
 # and Mac users are advised to set this option to NO.
 
d30dd7c2
 CASE_SENSE_NAMES       = YES
1f1462e8
 
 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
 # will show members with their full class and namespace scopes in the 
 # documentation. If set to YES the scope will be hidden.
 
d30dd7c2
 HIDE_SCOPE_NAMES       = NO
1f1462e8
 
 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
 # will put a list of the files that are included by a file in the documentation 
 # of that file.
 
d30dd7c2
 SHOW_INCLUDE_FILES     = YES
1f1462e8
 
 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
 # is inserted in the documentation for inline members.
 
d30dd7c2
 INLINE_INFO            = YES
1f1462e8
 
 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
 # will sort the (detailed) documentation of file and class members 
 # alphabetically by member name. If set to NO the members will appear in 
 # declaration order.
 
d30dd7c2
 SORT_MEMBER_DOCS       = YES
1f1462e8
 
 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
 # brief documentation of file, namespace and class members alphabetically 
 # by member name. If set to NO (the default) the members will appear in 
 # declaration order.
 
dc5083a6
 SORT_BRIEF_DOCS        = YES
1f1462e8
 
 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
 # sorted by fully-qualified names, including namespaces. If set to 
 # NO (the default), the class list will be sorted only by class name, 
 # not including the namespace part. 
 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
 # Note: This option applies only to the class list, not to the 
 # alphabetical list.
 
d30dd7c2
 SORT_BY_SCOPE_NAME     = NO
1f1462e8
 
 # The GENERATE_TODOLIST tag can be used to enable (YES) or 
 # disable (NO) the todo list. This list is created by putting \todo 
 # commands in the documentation.
 
d30dd7c2
 GENERATE_TODOLIST      = YES
1f1462e8
 
 # The GENERATE_TESTLIST tag can be used to enable (YES) or 
 # disable (NO) the test list. This list is created by putting \test 
 # commands in the documentation.
 
d30dd7c2
 GENERATE_TESTLIST      = YES
1f1462e8
 
 # The GENERATE_BUGLIST tag can be used to enable (YES) or 
 # disable (NO) the bug list. This list is created by putting \bug 
 # commands in the documentation.
 
d30dd7c2
 GENERATE_BUGLIST       = YES
1f1462e8
 
 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
 # disable (NO) the deprecated list. This list is created by putting 
 # \deprecated commands in the documentation.
 
d30dd7c2
 GENERATE_DEPRECATEDLIST= YES
1f1462e8
 
 # The ENABLED_SECTIONS tag can be used to enable conditional 
 # documentation sections, marked by \if sectionname ... \endif.
 
d30dd7c2
 ENABLED_SECTIONS       = 
1f1462e8
 
 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
 # the initial value of a variable or define consists of for it to appear in 
 # the documentation. If the initializer consists of more lines than specified 
 # here it will be hidden. Use a value of 0 to hide initializers completely. 
 # The appearance of the initializer of individual variables and defines in the 
 # documentation can be controlled using \showinitializer or \hideinitializer 
 # command in the documentation regardless of this setting.
 
d30dd7c2
 MAX_INITIALIZER_LINES  = 30
1f1462e8
 
 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
 # at the bottom of the documentation of classes and structs. If set to YES the 
 # list will mention the files that were used to generate the documentation.
 
d30dd7c2
 SHOW_USED_FILES        = YES
1f1462e8
 
 # If the sources in your project are distributed over multiple directories 
 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy 
 # in the documentation. The default is NO.
 
 SHOW_DIRECTORIES       = YES
 
 # The FILE_VERSION_FILTER tag can be used to specify a program or script that 
 # doxygen should invoke to get the current version for each file (typically from the 
 # version control system). Doxygen will invoke the program by executing (via 
 # popen()) the command <command> <input-file>, where <command> is the value of 
 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file 
 # provided by doxygen. Whatever the program writes to standard output 
 # is used as the file version. See the manual for examples.
 
 FILE_VERSION_FILTER    = 
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to warning and progress messages
 #---------------------------------------------------------------------------
1f1462e8
 
 # The QUIET tag can be used to turn on/off the messages that are generated 
 # by doxygen. Possible values are YES and NO. If left blank NO is used.
 
dc5083a6
 QUIET                  = YES
1f1462e8
 
 # The WARNINGS tag can be used to turn on/off the warning messages that are 
 # generated by doxygen. Possible values are YES and NO. If left blank 
 # NO is used.
 
d30dd7c2
 WARNINGS               = YES
1f1462e8
 
 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
 # automatically be disabled.
 
 WARN_IF_UNDOCUMENTED   = NO
 
 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
 # potential errors in the documentation, such as not documenting some 
 # parameters in a documented function, or documenting parameters that 
 # don't exist or using markup commands wrongly.
 
d30dd7c2
 WARN_IF_DOC_ERROR      = YES
1f1462e8
 
 # This WARN_NO_PARAMDOC option can be abled to get warnings for 
 # functions that are documented, but have no documentation for their parameters 
 # or return value. If set to NO (the default) doxygen will only warn about 
 # wrong or incomplete parameter documentation, but not about the absence of 
 # documentation.
 
 WARN_NO_PARAMDOC       = YES
 
 # The WARN_FORMAT tag determines the format of the warning messages that 
 # doxygen can produce. The string should contain the $file, $line, and $text 
 # tags, which will be replaced by the file and line number from which the 
 # warning originated and the warning text. Optionally the format may contain 
 # $version, which will be replaced by the version of the file (if it could 
 # be obtained via FILE_VERSION_FILTER)
 
 WARN_FORMAT            = "$file:$line: $text "
 
 # The WARN_LOGFILE tag can be used to specify a file to which warning 
 # and error messages should be written. If left blank the output is written 
 # to stderr.
 
d30dd7c2
 WARN_LOGFILE           = 
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to the input files
 #---------------------------------------------------------------------------
1f1462e8
 
 # The INPUT tag can be used to specify the files and/or directories that contain 
 # documented source files. You may enter file names like "myfile.cpp" or 
 # directories like "/usr/src/myproject". Separate the files or directories 
 # with spaces.
 
d30dd7c2
 INPUT                  = 
1f1462e8
 
 # This tag can be used to specify the character encoding of the source files that 
 # doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default 
 # input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. 
 # See http://www.gnu.org/software/libiconv for the list of possible encodings.
 
 INPUT_ENCODING         = UTF-8
 
 # If the value of the INPUT tag contains directories, you can use the 
 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
 # and *.h) to filter out the source-files in the directories. If left 
 # blank the following patterns are tested: 
 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx 
 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
 
d30dd7c2
 FILE_PATTERNS          = *.c \
                          *.cc \
                          *.cxx \
                          *.cpp \
                          *.c++ \
                          *.h \
                          *.hh \
                          *.hxx \
                          *.hpp \
                          *.h++ \
                          *.php \
                          *.php3 \
                          *.dox \
                          *.py \
                          *.C \
                          *.CC \
                          *.C++ \
                          *.H \
                          *.HH \
                          *.H++ \
                          *.PHP \
                          *.PHP3 \
                          *.PY
1f1462e8
 
 # The RECURSIVE tag can be used to turn specify whether or not subdirectories 
 # should be searched for input files as well. Possible values are YES and NO. 
 # If left blank NO is used.
 
d30dd7c2
 RECURSIVE              = YES
1f1462e8
 
 # The EXCLUDE tag can be used to specify files and/or directories that should 
 # excluded from the INPUT source files. This way you can easily exclude a 
 # subdirectory from a directory tree whose root is specified with the INPUT tag.
 
 EXCLUDE                = 
 
 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or 
 # directories that are symbolic links (a Unix filesystem feature) are excluded 
 # from the input.
 
d30dd7c2
 EXCLUDE_SYMLINKS       = NO
1f1462e8
 
 # If the value of the INPUT tag contains directories, you can use the 
 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
 # certain files from those directories. Note that the wildcards are matched 
 # against the file with absolute path, so to exclude all test directories 
 # for example use the pattern */test/*
 
d30dd7c2
 EXCLUDE_PATTERNS       = */CVS/* \
1f1462e8
                          */etc/* \
                          */examples/* \
                          */pkg/* \
                          */profile/* \
                          */scripts/*
 
 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names 
 # (namespaces, classes, functions, etc.) that should be excluded from the output. 
 # The symbol name can be a fully qualified name, a word, or if the wildcard * is used, 
 # a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
 
 EXCLUDE_SYMBOLS        = 
 
 # The EXAMPLE_PATH tag can be used to specify one or more files or 
 # directories that contain example code fragments that are included (see 
 # the \include command).
 
3c86cd25
 EXAMPLE_PATH           = doc/doxygen/examples \
 			doc
1f1462e8
 
 # If the value of the EXAMPLE_PATH tag contains directories, you can use the 
 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
 # and *.h) to filter out the source-files in the directories. If left 
 # blank all files are included.
 
d30dd7c2
 EXAMPLE_PATTERNS       = *
1f1462e8
 
 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
 # searched for input files to be used with the \include or \dontinclude 
 # commands irrespective of the value of the RECURSIVE tag. 
 # Possible values are YES and NO. If left blank NO is used.
 
0881695b
 EXAMPLE_RECURSIVE      = YES
1f1462e8
 
 # The IMAGE_PATH tag can be used to specify one or more files or 
 # directories that contain image that are included in the documentation (see 
 # the \image command).
 
d30dd7c2
 IMAGE_PATH             = 
1f1462e8
 
 # The INPUT_FILTER tag can be used to specify a program that doxygen should 
 # invoke to filter for each input file. Doxygen will invoke the filter program 
 # by executing (via popen()) the command <filter> <input-file>, where <filter> 
 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
 # input file. Doxygen will then use the output that the filter program writes 
 # to standard output.  If FILTER_PATTERNS is specified, this tag will be 
 # ignored.
 
d30dd7c2
 INPUT_FILTER           = 
1f1462e8
 
 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
 # basis.  Doxygen will compare the file name with each pattern and apply the 
 # filter if there is a match.  The filters are a list of the form: 
 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
 # is applied to all files.
 
d30dd7c2
 FILTER_PATTERNS        = 
1f1462e8
 
 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
 # INPUT_FILTER) will be used to filter the input files when producing source 
 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
 
d30dd7c2
 FILTER_SOURCE_FILES    = NO
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to source browsing
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
 # be generated. Documented entities will be cross-referenced with these sources. 
 # Note: To get rid of all source code in the generated output, make sure also 
 # VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH 
 # then you must also enable this option. If you don't then doxygen will produce 
 # a warning and turn it on anyway
 
d30dd7c2
 SOURCE_BROWSER         = YES
1f1462e8
 
 # Setting the INLINE_SOURCES tag to YES will include the body 
 # of functions and classes directly in the documentation.
 
d30dd7c2
 INLINE_SOURCES         = NO
1f1462e8
 
 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
 # doxygen to hide any special comment blocks from generated source code 
 # fragments. Normal C and C++ comments will always remain visible.
 
d30dd7c2
 STRIP_CODE_COMMENTS    = YES
1f1462e8
 
 # If the REFERENCED_BY_RELATION tag is set to YES (the default) 
 # then for each documented function all documented 
 # functions referencing it will be listed.
 
d30dd7c2
 REFERENCED_BY_RELATION = YES
1f1462e8
 
 # If the REFERENCES_RELATION tag is set to YES (the default) 
 # then for each documented function all documented entities 
 # called/used by that function will be listed.
 
d30dd7c2
 REFERENCES_RELATION    = YES
1f1462e8
 
 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
 # link to the source code.  Otherwise they will link to the documentstion.
 
d30dd7c2
 REFERENCES_LINK_SOURCE = YES
1f1462e8
 
 # If the USE_HTAGS tag is set to YES then the references to source code 
 # will point to the HTML generated by the htags(1) tool instead of doxygen 
 # built-in source browser. The htags tool is part of GNU's global source 
 # tagging system (see http://www.gnu.org/software/global/global.html). You 
 # will need version 4.8.6 or higher.
 
d30dd7c2
 USE_HTAGS              = NO
1f1462e8
 
 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
 # will generate a verbatim copy of the header file for each class for 
 # which an include is specified. Set to NO to disable this.
 
d30dd7c2
 VERBATIM_HEADERS       = YES
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to the alphabetical class index
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
 # of all compounds will be generated. Enable this if the project 
 # contains a lot of classes, structs, unions or interfaces.
 
df8dc6f0
 ALPHABETICAL_INDEX     = YES
1f1462e8
 
 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
 # in which this list will be split (can be a number in the range [1..20])
 
d30dd7c2
 COLS_IN_ALPHA_INDEX    = 5
1f1462e8
 
 # In case all classes in a project start with a common prefix, all 
 # classes will be put under the same header in the alphabetical index. 
 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
 # should be ignored while generating the index headers.
 
d30dd7c2
 IGNORE_PREFIX          = 
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to the HTML output
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
 # generate HTML output.
 
d30dd7c2
 GENERATE_HTML          = YES
1f1462e8
 
 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
 # put in front of it. If left blank `html' will be used as the default path.
 
d30dd7c2
 HTML_OUTPUT            = html
1f1462e8
 
 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
 # doxygen will generate files with .html extension.
 
d30dd7c2
 HTML_FILE_EXTENSION    = .html
1f1462e8
 
 # The HTML_HEADER tag can be used to specify a personal HTML header for 
 # each generated HTML page. If it is left blank doxygen will generate a 
 # standard header.
 
d30dd7c2
 HTML_HEADER            = 
1f1462e8
 
 # The HTML_FOOTER tag can be used to specify a personal HTML footer for 
 # each generated HTML page. If it is left blank doxygen will generate a 
 # standard footer.
 
d30dd7c2
 HTML_FOOTER            = 
1f1462e8
 
 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
 # style sheet that is used by each HTML page. It can be used to 
 # fine-tune the look of the HTML output. If the tag is left blank doxygen 
 # will generate a default style sheet. Note that doxygen will try to copy 
 # the style sheet file to the HTML output directory, so don't put your own 
 # stylesheet in the HTML output directory as well, or it will be erased!
 
d30dd7c2
 HTML_STYLESHEET        = 
1f1462e8
 
 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
 # files or namespaces will be aligned in HTML using tables. If set to 
 # NO a bullet list will be used.
 
d30dd7c2
 HTML_ALIGN_MEMBERS     = YES
1f1462e8
 
 # If the GENERATE_HTMLHELP tag is set to YES, additional index files 
 # will be generated that can be used as input for tools like the 
 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
 # of the generated HTML documentation.
 
d30dd7c2
 GENERATE_HTMLHELP      = NO
1f1462e8
 
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML 
 # documentation will contain sections that can be hidden and shown after the 
 # page has loaded. For this to work a browser that supports 
 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox 
 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
 
 HTML_DYNAMIC_SECTIONS  = NO
 
 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
 # be used to specify the file name of the resulting .chm file. You 
 # can add a path in front of the file if the result should not be 
 # written to the html output directory.
 
d30dd7c2
 CHM_FILE               = 
1f1462e8
 
 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
 # be used to specify the location (absolute path including file name) of 
 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
 # the HTML help compiler on the generated index.hhp.
 
d30dd7c2
 HHC_LOCATION           = 
1f1462e8
 
 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
 # controls if a separate .chi index file is generated (YES) or that 
 # it should be included in the master .chm file (NO).
 
d30dd7c2
 GENERATE_CHI           = NO
1f1462e8
 
 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
 # controls whether a binary table of contents is generated (YES) or a 
 # normal table of contents (NO) in the .chm file.
 
d30dd7c2
 BINARY_TOC             = NO
1f1462e8
 
 # The TOC_EXPAND flag can be set to YES to add extra items for group members 
 # to the contents of the HTML help documentation and to the tree view.
 
d30dd7c2
 TOC_EXPAND             = YES
1f1462e8
 
 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
 # top of each HTML page. The value NO (the default) enables the index and 
 # the value YES disables it.
 
d30dd7c2
 DISABLE_INDEX          = NO
1f1462e8
 
 # This tag can be used to set the number of enum values (range [1..20]) 
 # that doxygen will group on one line in the generated HTML documentation.
 
d30dd7c2
 ENUM_VALUES_PER_LINE   = 4
1f1462e8
 
 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
 # generated containing a tree-like index structure (just like the one that 
 # is generated for HTML Help). For this to work a browser that supports 
 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
 # probably better off using the HTML help feature.
 
d30dd7c2
 GENERATE_TREEVIEW      = no
1f1462e8
 
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
 # used to set the initial width (in pixels) of the frame in which the tree 
 # is shown.
 
d30dd7c2
 TREEVIEW_WIDTH         = 250
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to the LaTeX output
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
 # generate Latex output.
 
d30dd7c2
 GENERATE_LATEX         = NO
1f1462e8
 
 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
 # put in front of it. If left blank `latex' will be used as the default path.
 
d30dd7c2
 LATEX_OUTPUT           = latex
1f1462e8
 
 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
 # invoked. If left blank `latex' will be used as the default command name.
 
d30dd7c2
 LATEX_CMD_NAME         = latex
1f1462e8
 
 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
 # generate index for LaTeX. If left blank `makeindex' will be used as the 
 # default command name.
 
d30dd7c2
 MAKEINDEX_CMD_NAME     = makeindex
1f1462e8
 
 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
 # LaTeX documents. This may be useful for small projects and may help to 
 # save some trees in general.
 
d30dd7c2
 COMPACT_LATEX          = NO
1f1462e8
 
 # The PAPER_TYPE tag can be used to set the paper type that is used 
 # by the printer. Possible values are: a4, a4wide, letter, legal and 
 # executive. If left blank a4wide will be used.
 
d30dd7c2
 PAPER_TYPE             = a4wide
1f1462e8
 
 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
 # packages that should be included in the LaTeX output.
 
d30dd7c2
 EXTRA_PACKAGES         = 
1f1462e8
 
 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
 # the generated latex document. The header should contain everything until 
 # the first chapter. If it is left blank doxygen will generate a 
 # standard header. Notice: only use this tag if you know what you are doing!
 
d30dd7c2
 LATEX_HEADER           = 
1f1462e8
 
 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
 # is prepared for conversion to pdf (using ps2pdf). The pdf file will 
 # contain links (just like the HTML output) instead of page references 
 # This makes the output suitable for online browsing using a pdf viewer.
 
d30dd7c2
 PDF_HYPERLINKS         = NO
1f1462e8
 
 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
 # plain latex in the generated Makefile. Set this option to YES to get a 
 # higher quality PDF documentation.
 
d30dd7c2
 USE_PDFLATEX           = NO
1f1462e8
 
 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
 # command to the generated LaTeX files. This will instruct LaTeX to keep 
 # running if errors occur, instead of asking the user for help. 
 # This option is also used when generating formulas in HTML.
 
d30dd7c2
 LATEX_BATCHMODE        = NO
1f1462e8
 
 # If LATEX_HIDE_INDICES is set to YES then doxygen will not 
 # include the index chapters (such as File Index, Compound Index, etc.) 
 # in the output.
 
d30dd7c2
 LATEX_HIDE_INDICES     = NO
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to the RTF output
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
 # The RTF output is optimized for Word 97 and may not look very pretty with 
 # other RTF readers or editors.
 
d30dd7c2
 GENERATE_RTF           = NO
1f1462e8
 
 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
 # put in front of it. If left blank `rtf' will be used as the default path.
 
d30dd7c2
 RTF_OUTPUT             = rtf
1f1462e8
 
 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
 # RTF documents. This may be useful for small projects and may help to 
 # save some trees in general.
 
d30dd7c2
 COMPACT_RTF            = NO
1f1462e8
 
 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
 # will contain hyperlink fields. The RTF file will 
 # contain links (just like the HTML output) instead of page references. 
 # This makes the output suitable for online browsing using WORD or other 
 # programs which support those fields. 
 # Note: wordpad (write) and others do not support links.
 
d30dd7c2
 RTF_HYPERLINKS         = NO
1f1462e8
 
 # Load stylesheet definitions from file. Syntax is similar to doxygen's 
 # config file, i.e. a series of assignments. You only have to provide 
 # replacements, missing definitions are set to their default value.
 
d30dd7c2
 RTF_STYLESHEET_FILE    = 
1f1462e8
 
 # Set optional variables used in the generation of an rtf document. 
 # Syntax is similar to doxygen's config file.
 
d30dd7c2
 RTF_EXTENSIONS_FILE    = 
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to the man page output
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
 # generate man pages
 
d30dd7c2
 GENERATE_MAN           = NO
1f1462e8
 
 # The MAN_OUTPUT tag is used to specify where the man pages will be put. 
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
 # put in front of it. If left blank `man' will be used as the default path.
 
d30dd7c2
 MAN_OUTPUT             = man
1f1462e8
 
 # The MAN_EXTENSION tag determines the extension that is added to 
 # the generated man pages (default is the subroutine's section .3)
 
d30dd7c2
 MAN_EXTENSION          = .3
1f1462e8
 
 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
 # then it will generate one additional man file for each entity 
 # documented in the real man page(s). These additional files 
 # only source the real man page, but without them the man command 
 # would be unable to find the correct page. The default is NO.
 
d30dd7c2
 MAN_LINKS              = NO
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to the XML output
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the GENERATE_XML tag is set to YES Doxygen will 
 # generate an XML file that captures the structure of 
 # the code including all documentation.
 
d30dd7c2
 GENERATE_XML           = NO
1f1462e8
 
 # The XML_OUTPUT tag is used to specify where the XML pages will be put. 
 # If a relative path is entered the value of OUTPUT_DIRECTORY will be 
 # put in front of it. If left blank `xml' will be used as the default path.
 
d30dd7c2
 XML_OUTPUT             = xml
1f1462e8
 
 # The XML_SCHEMA tag can be used to specify an XML schema, 
 # which can be used by a validating XML parser to check the 
 # syntax of the XML files.
 
d30dd7c2
 XML_SCHEMA             = 
1f1462e8
 
 # The XML_DTD tag can be used to specify an XML DTD, 
 # which can be used by a validating XML parser to check the 
 # syntax of the XML files.
 
d30dd7c2
 XML_DTD                = 
1f1462e8
 
 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
 # dump the program listings (including syntax highlighting 
 # and cross-referencing information) to the XML output. Note that 
 # enabling this will significantly increase the size of the XML output.
 
d30dd7c2
 XML_PROGRAMLISTING     = YES
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options for the AutoGen Definitions output
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
 # generate an AutoGen Definitions (see autogen.sf.net) file 
 # that captures the structure of the code including all 
 # documentation. Note that this feature is still experimental 
 # and incomplete at the moment.
 
d30dd7c2
 GENERATE_AUTOGEN_DEF   = NO
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # configuration options related to the Perl module output
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the GENERATE_PERLMOD tag is set to YES Doxygen will 
 # generate a Perl module file that captures the structure of 
 # the code including all documentation. Note that this 
 # feature is still experimental and incomplete at the 
 # moment.
 
d30dd7c2
 GENERATE_PERLMOD       = NO
1f1462e8
 
 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
 # the necessary Makefile rules, Perl scripts and LaTeX code to be able 
 # to generate PDF and DVI output from the Perl module output.
 
d30dd7c2
 PERLMOD_LATEX          = NO
1f1462e8
 
 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
 # nicely formatted so it can be parsed by a human reader.  This is useful 
 # if you want to understand what is going on.  On the other hand, if this 
 # tag is set to NO the size of the Perl module output will be much smaller 
 # and Perl will parse it just the same.
 
d30dd7c2
 PERLMOD_PRETTY         = YES
1f1462e8
 
 # The names of the make variables in the generated doxyrules.make file 
 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
 # This is useful so different doxyrules.make files included by the same 
 # Makefile don't overwrite each other's variables.
 
d30dd7c2
 PERLMOD_MAKEVAR_PREFIX = 
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # Configuration options related to the preprocessor   
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
 # evaluate all C-preprocessor directives found in the sources and include 
 # files.
 
d30dd7c2
 ENABLE_PREPROCESSING   = YES
1f1462e8
 
 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
 # names in the source code. If set to NO (the default) only conditional 
 # compilation will be performed. Macro expansion can be done in a controlled 
 # way by setting EXPAND_ONLY_PREDEF to YES.
 
d30dd7c2
 MACRO_EXPANSION        = NO
1f1462e8
 
 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
 # then the macro expansion is limited to the macros specified with the 
 # PREDEFINED and EXPAND_AS_DEFINED tags.
 
d30dd7c2
 EXPAND_ONLY_PREDEF     = NO
1f1462e8
 
 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
 # in the INCLUDE_PATH (see below) will be search if a #include is found.
 
d30dd7c2
 SEARCH_INCLUDES        = YES
1f1462e8
 
 # The INCLUDE_PATH tag can be used to specify one or more directories that 
 # contain include files that are not input files but should be processed by 
 # the preprocessor.
 
d30dd7c2
 INCLUDE_PATH           = 
1f1462e8
 
 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
 # patterns (like *.h and *.hpp) to filter out the header-files in the 
 # directories. If left blank, the patterns specified with FILE_PATTERNS will 
 # be used.
 
d30dd7c2
 INCLUDE_FILE_PATTERNS  = 
1f1462e8
 
 # The PREDEFINED tag can be used to specify one or more macro names that 
 # are defined before the preprocessor is started (similar to the -D option of 
 # gcc). The argument of the tag is a list of macros of the form: name 
 # or name=definition (no spaces). If the definition and the = are 
 # omitted =1 is assumed. To prevent a macro definition from being 
 # undefined via #undef or recursively expanded use the := operator 
 # instead of the = operator.
 
d30dd7c2
 PREDEFINED             = 
1f1462e8
 
 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
 # this tag can be used to specify a list of macro names that should be expanded. 
 # The macro definition that is found in the sources will be used. 
 # Use the PREDEFINED tag if you want to use a different macro definition.
 
d30dd7c2
 EXPAND_AS_DEFINED      = 
1f1462e8
 
 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
 # doxygen's preprocessor will remove all function-like macros that are alone 
 # on a line, have an all uppercase name, and do not end with a semicolon. Such 
 # function macros are typically used for boiler-plate code, and will confuse 
 # the parser if not removed.
 
d30dd7c2
 SKIP_FUNCTION_MACROS   = YES
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # Configuration::additions related to external references   
 #---------------------------------------------------------------------------
1f1462e8
 
 # The TAGFILES option can be used to specify one or more tagfiles. 
 # Optionally an initial location of the external documentation 
 # can be added for each tagfile. The format of a tag file without 
 # this location is as follows: 
 #   TAGFILES = file1 file2 ... 
 # Adding location for the tag files is done as follows: 
 #   TAGFILES = file1=loc1 "file2 = loc2" ... 
 # where "loc1" and "loc2" can be relative or absolute paths or 
 # URLs. If a location is present for each tag, the installdox tool 
 # does not have to be run to correct the links.
 # Note that each tag file must have a unique name
 # (where the name does NOT include the path)
 # If a tag file is not located in the directory in which doxygen 
 # is run, you must also specify the path to the tagfile here.
 
d30dd7c2
 TAGFILES               = 
1f1462e8
 
 # When a file name is specified after GENERATE_TAGFILE, doxygen will create 
 # a tag file that is based on the input files it reads.
 
d30dd7c2
 GENERATE_TAGFILE       = 
1f1462e8
 
 # If the ALLEXTERNALS tag is set to YES all external classes will be listed 
 # in the class index. If set to NO only the inherited external classes 
 # will be listed.
 
d30dd7c2
 ALLEXTERNALS           = NO
1f1462e8
 
 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
 # in the modules index. If set to NO, only the current project's groups will 
 # be listed.
 
d30dd7c2
 EXTERNAL_GROUPS        = YES
1f1462e8
 
 # The PERL_PATH should be the absolute path and name of the perl script 
 # interpreter (i.e. the result of `which perl').
 
d30dd7c2
 PERL_PATH              = /usr/bin/perl
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # Configuration options related to the dot tool   
 #---------------------------------------------------------------------------
1f1462e8
 
 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base 
 # or super classes. Setting the tag to NO turns the diagrams off. Note that 
 # this option is superseded by the HAVE_DOT option below. This is only a 
 # fallback. It is recommended to install and use dot, since it yields more 
 # powerful graphs.
 
0881695b
 CLASS_DIAGRAMS         = NO
1f1462e8
 
 # You can define message sequence charts within doxygen comments using the \msc 
 # command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to 
 # produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to 
 # specify the directory where the mscgen tool resides. If left empty the tool is assumed to 
 # be found in the default search path.
 
 MSCGEN_PATH            = 
 
 # If set to YES, the inheritance and collaboration graphs will hide 
 # inheritance and usage relations if the target is undocumented 
 # or is not a class.
 
d30dd7c2
 HIDE_UNDOC_RELATIONS   = YES
1f1462e8
 
 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
 # available from the path. This tool is part of Graphviz, a graph visualization 
 # toolkit from AT&T and Lucent Bell Labs. The other options in this section 
 # have no effect if this option is set to NO (the default)
 
d30dd7c2
 HAVE_DOT               = YES
1f1462e8
 
 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
 # will generate a graph for each documented class showing the direct and 
 # indirect inheritance relations. Setting this tag to YES will force the 
 # the CLASS_DIAGRAMS tag to NO.
 
d30dd7c2
 CLASS_GRAPH            = YES
1f1462e8
 
 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
 # will generate a graph for each documented class showing the direct and 
 # indirect implementation dependencies (inheritance, containment, and 
 # class references variables) of the class with other documented classes.
 
d30dd7c2
 COLLABORATION_GRAPH    = YES
1f1462e8
 
 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen 
 # will generate a graph for groups, showing the direct groups dependencies
 
d30dd7c2
 GROUP_GRAPHS           = YES
1f1462e8
 
 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
 # collaboration diagrams in a style similar to the OMG's Unified Modeling 
 # Language.
 
d30dd7c2
 UML_LOOK               = NO
1f1462e8
 
 # If set to YES, the inheritance and collaboration graphs will show the 
 # relations between templates and their instances.
 
d30dd7c2
 TEMPLATE_RELATIONS     = NO
1f1462e8
 
 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
 # tags are set to YES then doxygen will generate a graph for each documented 
 # file showing the direct and indirect include dependencies of the file with 
 # other documented files.
 
d30dd7c2
 INCLUDE_GRAPH          = YES
1f1462e8
 
 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
 # documented header file showing the documented files that directly or 
 # indirectly include this file.
 
d30dd7c2
 INCLUDED_BY_GRAPH      = YES
1f1462e8
 
 # If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will 
 # generate a call dependency graph for every global function or class method. 
 # Note that enabling this option will significantly increase the time of a run. 
 # So in most cases it will be better to enable call graphs for selected 
 # functions only using the \callgraph command.
 
df8dc6f0
 CALL_GRAPH             = YES
1f1462e8
 
 # If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will 
 # generate a caller dependency graph for every global function or class method. 
 # Note that enabling this option will significantly increase the time of a run. 
 # So in most cases it will be better to enable caller graphs for selected 
 # functions only using the \callergraph command.
 
df8dc6f0
 CALLER_GRAPH           = YES
1f1462e8
 
 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
 # will graphical hierarchy of all classes instead of a textual one.
 
d30dd7c2
 GRAPHICAL_HIERARCHY    = YES
1f1462e8
 
 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES 
 # then doxygen will show the dependencies a directory has on other directories 
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
 
d30dd7c2
 DIRECTORY_GRAPH        = YES
1f1462e8
 
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
 # generated by dot. Possible values are png, jpg, or gif
 # If left blank png will be used.
 
d30dd7c2
 DOT_IMAGE_FORMAT       = png
1f1462e8
 
 # The tag DOT_PATH can be used to specify the path where the dot tool can be 
 # found. If left blank, it is assumed the dot tool can be found in the path.
 
d30dd7c2
 DOT_PATH               = 
1f1462e8
 
 # The DOTFILE_DIRS tag can be used to specify one or more directories that 
 # contain dot files that are included in the documentation (see the 
 # \dotfile command).
 
d30dd7c2
 DOTFILE_DIRS           = 
1f1462e8
 
 # The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of 
 # nodes that will be shown in the graph. If the number of nodes in a graph 
 # becomes larger than this value, doxygen will truncate the graph, which is 
 # visualized by representing a node as a red box. Note that doxygen if the number 
 # of direct children of the root node in a graph is already larger than 
 # MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note 
 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
 
 DOT_GRAPH_MAX_NODES    = 50
 
 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
 # graphs generated by dot. A depth value of 3 means that only nodes reachable 
 # from the root by following a path via at most 3 edges will be shown. Nodes 
 # that lay further from the root node will be omitted. Note that setting this 
 # option to 1 or 2 may greatly reduce the computation time needed for large 
 # code bases. Also note that the size of a graph can be further restricted by 
 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
 
d30dd7c2
 MAX_DOT_GRAPH_DEPTH    = 1000
1f1462e8
 
 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent 
 # background. This is disabled by default, which results in a white background. 
 # Warning: Depending on the platform used, enabling this option may lead to 
 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to 
 # read).
 
d30dd7c2
 DOT_TRANSPARENT        = NO
1f1462e8
 
 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output 
 # files in one run (i.e. multiple -o and -T options on the command line). This 
 # makes dot run faster, but since only newer versions of dot (>1.8.10) 
 # support this, this feature is disabled by default.
 
d30dd7c2
 DOT_MULTI_TARGETS      = NO
1f1462e8
 
 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
 # generate a legend page explaining the meaning of the various boxes and 
 # arrows in the dot generated graphs.
 
d30dd7c2
 GENERATE_LEGEND        = YES
1f1462e8
 
 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
 # remove the intermediate dot files that are used to generate 
 # the various graphs.
 
d30dd7c2
 DOT_CLEANUP            = YES
1f1462e8
 
d30dd7c2
 #---------------------------------------------------------------------------
 # Configuration::additions related to the search engine   
 #---------------------------------------------------------------------------
1f1462e8
 
 # The SEARCHENGINE tag specifies whether or not a search engine should be 
 # used. If set to NO the values of all tags below this one will be ignored.
 
d30dd7c2
 SEARCHENGINE           = NO